Basic adjustment settings (Analogue)
Manual setting for each channel (continued)
Skipping channels
Channels with "Skip" set to "On" are passed over when
using CHa/CHb even if selected while watching the
image from the TV.
1
Press a/b/c/d to select the channel you
want to edit, and then press OK.
• The selected channel information displays.
2
Press a/b to select "Skip", and then press
OK.
• Skip menu displays.
[ Setup ... Programme Setup ... Manual Adjust ]
MENU
Fine
[179.25]
Colour sys.
[AUTO]
Sound sys.
[B/G]
Label
[SAT.1]
Skip
[Off]
Decoder
[Off]
Lock
[Off]
3
Press a/b to set "Skip" to "On", and then
press OK.
Setting the decoder
When connecting a decoder to the unit, you need to
assign the terminal input.
1
Press a/b/c/d to select the channel you
want to edit, and then press OK.
• The selected channel information displays.
32
Skip menu
Off
On
2
Press a/b to select "Decoder", and then
press OK.
• Terminal inputs information displays.
Decoder menu
Fine
[179.25]
Colour sys.
[AUTO]
Sound sys.
[B/G]
Label
[SAT.1]
Skip
[Off]
Decoder
[Off]
Lock
[Off]
3
Press a/b to set "Decoder" to "INPUT1",
"INPUT2" or "INPUT3", and then press OK.
NOTE
• "Off" is factory preset value.
Setting the child lock
You can block the viewing of any channel.
1
Press a/b/c/d to select the channel you
want to edit, and then press OK.
• The selected channel information displays.
Press a/b to select "Lock", and then press
2
OK.
• Child lock menu displays.
Fine
[179.25]
Colour sys.
[AUTO]
Sound sys.
[B/G]
Label
[SAT.1]
Skip
[Off]
Decoder
[Off]
Lock
[Off]
Press a/b to set "Lock" to "On", and then
3
press OK.
NOTE
• See page 83 for setting PIN.
• When "Lock" is set to "On" for a channel, "Child lock has
been activated." displays , and the image and sound of
the channel is blocked.
• When pressing OK while "Child lock has been activated."
displays, PIN input menu will display. Inputting the correct
PIN lifts the child lock temporarily until the power is turned
off.
Off
INPUT1
INPUT2
INPUT3
Lock menu
Off
On