Before Operation; Selecting The Language - Sharp R-933FS Operation Manual

R-933F English 2/7/02
Your oven has an energy save mode.
1. Plug in the oven. Nothing will appear on the
display at this time.
2. Open the door.
The oven display will show "SELECT
LANGUAGE" in 5 languages.
NOTE: Once you select the language using the
LANGUAGE button, the display will show
"ENERGY SAVE MODE TO GO OUT OF
ENERGY SAVE MODE SET CLOCK" when you
plug the oven in.
3. Close the door.
4. Select a language (See below).
NOTE: If you use the oven in German, you do
not have to select language, simply press the
STOP button. The display will show ".0" and
go to step 5.
Press LANGUAGE button
once
twice
3 times
4 times
5 times
Example:
Suppose you want to select Italian:
1. Choose the desired
language by pressing the
LANGUAGE button.
x4
NOTE: The selected language will be memorised even if the electical power supply is interrupted.
12:37 PM Page 7

SELECTING THE LANGUAGE

LANGUAGE
DEUTSCH
NEDERLANDS
FRANÇAIS
ITALIAN
ESPAÑOL
2. Press the +1 min
button to start the setting.

BEFORE OPERATION

5. Set the clock (See page 8).
6. Heat the oven without food (See page 11).
COOKING HINTS:
The oven has an 'Information Display System' which
offers you step by step instructions to easily guide you
through each feature, and enable you to gain
information in your desired language. The oven has
an INFORMATION button for getting instructions
for each button. Indicators will appear in the display,
after pressing a button, to inform you of the next
operation step.
The oven comes set for German. You can change the
language. To change, press the LANGUAGE button
until the desired language is displayed. Then press the
+1 min /START button.
/START
x1
7
Check the display.