Input Skip; Input Label; Input1; Input2 - Sharp Aquos LC-32D53X Operation Manual

Useful adjustment settings

Input Skip

This setting allows you to skip the HDMI or PC input
on the Input Selection operation.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Input Skip", and then
3
press ENTER.
Press a / b to select the Input (INPUT 3,
4
INPUT 4 or INPUT 5) you wish to skip, and
then press ENTER.
INPUT 3
INPUT 4
INPUT 5
Press a / b to select "Yes", and then press
5
ENTER.
Press MENU to exit.
6
Yes
No

Input Label

You can assign each input source a label you like.
Press TV/VIDEO to select the desired input
1
source.
Press MENU and the MENU screen displays.
2
Press c / d to select "Setup".
3
Press a / b to select "Input Label", and then
4
press ENTER.
Press a / b to select characters and c / d
5
to move to the desired digit to label the input
source.
• When you want to change the input label that you
have already assigned to the default name, press
c / d to move to "CLEAR" on the "Input Label"
screen, and then press ENTER.
Repeat the above until the name is fully spelt
6
out, and then press MENU.
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, press MENU to exit from
the labelling menu.
TV
DTV
NOTE
• You cannot change labels if the input source is TV or DTV.

INPUT1

INPUT2

DVD
INPUT4
INPUT5
(Example)
39