Advertisement

Quick Links

TopPage
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig-
inal condition and only parts identical to those specified should be used.
SAFETY PRECAUTION
CAUTION ............................................... . ............i
End of life disposal ................................. . .......... iii
CHAPTER 1. OPERATION MANUAL
[1]
SPECIFICATIONS ................................. . ....... 1-1
[2]
OPERATION MANUAL .......................... . ....... 1-2
[3]
DIMENSIONS ........................................ . ....... 1-6
[1]
REMOVING OF MAJOR PARTS ........... . ....... 2-1
[1]
ADJUSTMENT PROCEDURE ............... . ....... 3-1
[1]
TROUBLESHOOTING TABLE............... . ....... 4-1
[1]
MAJOR IC INFOMATIONS .................... . ....... 5-1
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.
SERVICE MANUAL
LCD COLOUR TELEVISION
LC-32DH57E/RU/S
MODELS
CONTENTS
[1]
SYSTEM BLOCK DIAGRAM .........................6-1
[2]
OVERALL WIRING DIAGRAM ......................6-2
[1]
[2]
BOARD..........................................................7-5
[3]
BOARD..........................................................7-6
[4]
BOARD..........................................................7-8
CHAPTER 8. SCHEMATIC DIAGRAM
[1]
GRAM............................................................8-1
[2]
SCHEMATIC DIAGRAM ................................8-2
LC-32DH57E/RU/S
No. S59Z3LC32DH57
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.

Advertisement

Table of Contents
loading

Summary of Contents for Sharp LC-32DH57RU, LC-32DH57S

  • Page 1: Table Of Contents

    TopPage LC-32DH57E/RU/S SERVICE MANUAL No. S59Z3LC32DH57 LCD COLOUR TELEVISION LC-32DH57E/RU/S MODELS In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig- inal condition and only parts identical to those specified should be used. CONTENTS SAFETY PRECAUTION CHAPTER 6.
  • Page 2: Important Service Safety Pre

    LC-32DH57E/RU/S LC-32DH57E-BK SAFETY PRECAUTION Service Manual IMPORTANT SERVICE SAFETY PRECAUTION Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and the servicing guidelines which follow: WARNING • Use an AC voltmeter having with 5000 ohm per volt, or higher, sen- sitivity or measure the AC voltage drop across the resistor.
  • Page 3: Precautions For Using Lead-Free Solder

    LC-32DH57E/RU/S Precautions for using lead-free solder Employing lead-free solder • “PWBs” of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. The alphabetical character following LF shows the type of lead-free solder. Example: F a/a Indicates lead-free solder of tin, silver and copper.
  • Page 4: End Of Life Disposal

    If the product is used for business purposes and you want to discard it: Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local collection facilities.
  • Page 5: Specifications

    • As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
  • Page 6 LC-32DH57E/RU/S [2] OPERATION MANUAL TV (Front view) Remote control sensor OPC sensor (Standby/On indicator) (Power button) MENU (Menu button) (Input source button) (Programme [channel] buttons) +/- (Volume buttons) TV (Rear view) COMMON INTERFACE slot SERVICE terminal (USB terminal for service personnel only) HDMI 3 (HDMI) terminal EXT 8 terminals Headphones...
  • Page 7 LC-32DH57E/RU/S Remote control unit (Standby/On) +/- (Volume) Increase/decrease TV volume. Numeric buttons 0-9 Set the channel. Select the TV channel. Enter desired numbers. (INPUT SOURCE) Set the page in teletext mode. Select an input source. • When the five Nordic countries (Sweden, Norway, Finland, Directly select EXT 4.
  • Page 8 LC-32DH57E/RU/S Attaching the stand unit • Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal. • Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged.
  • Page 9 The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely distributed software and software components whose copyrights are held by third parties.
  • Page 10: Dimensions

    LC-32DH57E/RU/S [3] DIMENSIONS Unit: mm 390.0 390,0 66.2 123.5 791.0 66,2 123,5 791,0 699.2 699,2 235.0 235,0 200.0 200,0 1 – 6...
  • Page 11: Chapter 2. Removing Of Major Parts

    LC-32DH57E/RU/S CHAPTER 2. LC-32DH57E-BK REMOVING OF MAJOR PARTS Service Manual [1] REMOVING OF MAJOR PARTS 1. Removing of Rear Cabinet Ass’y. 1. Remove the 1 lock screw , 3 lock screws , 9 lock screws and detach the Rear Cabinet Ass’y. Rear Cabinet Ass'y 2 –...
  • Page 12 LC-32DH57E/RU/S 2. Removing of Connectors, Speakers, Stand Angle Ass’y and Stand Ass’y. 1. Remove all the connectors from all the PWBs. 2. Remove the 2 lock screws and detach the Speaker-L and Speaker-R. 3. Remove the 2 lock screws , 4 lock screws and detach the Stand Angle Ass’y.
  • Page 13 LC-32DH57E/RU/S 3. Removing of Main PWB Shield and AV Cover Ass’y. 1. Remove all the connectors from all the PWBs. 2. Remove the 4 lock screw , 2 lock screws , 1 lock screw , 6 lock screws and detach the Main PWB Shield. 3.
  • Page 14 LC-32DH57E/RU/S 4. Removing of LED Unit, MAIN Unit, POWER Unit, INVERTER Unit, AC Inlet Angle, Control Button and KEY Unit. 1. Remove all the connectors from all the PWBs. 2. Remove the 1 lock screw and detach the LED Unit. 3.
  • Page 15 LC-32DH57E/RU/S 5. Removing of 32” LCD Panel Module. 1. Remove the 4 lock screws and detach the 32” LCD Panel Module from Front Cabinet. Front Cabinet Ass'y 32" LCD Panel Module 2 – 5...
  • Page 16: Chapter 3. Adjustment Procedure

    LC-32DH57E/RU/S CHAPTER 3. LC-32DH57E-BK ADJUSTMENT PROCEDURE Service Manual [1] ADJUSTMENT PROCEDURE 1. Adjustment method after PWB and/or IC replacement due to repair The unit is set to the optimum at the time of shipment from the factory. If any value should become improper or any adjustment is necessary due to the part replacement, make an adjustment according to the following procedure.
  • Page 17 LC-32DH57E/RU/S 4. Description of display (1) Current page / Total pages (2) Currentry selected input (3) Inch setting and Model name display PAGE 32E_DH57E Adjustment process menu header Main Version 1.14 Boot Version 20090429.1.12 T-CON Version 00 00 00 00 32 4C INCH SIZE ERROR RESET...
  • Page 18 LC-32DH57E/RU/S 5. Adjustment process mode menu The character string in brackets [ ] will appear as a page title in the adjustment process menu header. Page Line Item Description Remarks (adjustment detail, etc.) Main Version 1.14 Main microprocessor version Boot Version 20090429.1.12 Boot version of the main microprocessor T-CON Version...
  • Page 19 LC-32DH57E/RU/S 6. Special features 1. STANDBY CAUSE (Page 1/7) Display of a cause (code) of the last standby. The cause of the last standby is recorded in EEPROM whenever possible. Checking this code will be useful in finding a problem when you repair the troubled set. 7.
  • Page 20 LC-32DH57E/RU/S 8. Adjustment procedure 1. Inch Setting Adjustment point Adjustment conditions Adjustment procedure Inch Setting Adjustment process mode 1) Inch Setting with adjustment process mode. 2) Enter the adjustment process mode, refering to the 2nd item. 3) By using P ( ) key of R/C, Move the cursor to “INCH SIZE”...
  • Page 21 LC-32DH57E/RU/S 9. Video signal adjustment procedure * The adjustment process mode menu is listed in 5th item. Signal generator level adjustment check (Adjustment to the specified level) : 0.7Vp-p ± 0.02Vp-p (White level from pedestal) • Composite signal PAL/SECAM : 0.7Vp-p ± 0.02Vp-p (White level from pedestal) •...
  • Page 22 LC-32DH57E/RU/S 10. White Balance Adjustment Adjustment gradation values (INFO) appear on page 7/7 3-4 lines of process adjustment, and adjustment initial values (offset value) appear on pages 7/7 5-10 lines. For white balance adjustment, adjust the offset values on pages 7/7 5-10 lines. 1.
  • Page 23 LC-32DH57E/RU/S 11. QS Temperature NVM Data Confirmation During servicing of the LCD TV set, by software upgrading or by any cleaning NVM, it’s mandatory select the “INCH SIZE” in Service Mode, Page 1, according to the size of the TV set. PAGE1/7 32E_DH57E PAGE1/7...
  • Page 24 LC-32DH57E/RU/S 13. Functional explanation of STANDBY CAUSE 13.1. [display method] It is displayed in the top page of the process adjustment mode. (Page displayed first when entering process mode) 13.2. [Content of display] 1. NORMAL STANDBY CAUSE The reason that became a power-off by the specification of usual use and the main body is displayed. (Only the one latest) It is not displayed when power supply OFF is carried out with remote control.
  • Page 25 LC-32DH57E/RU/S 15. Blinking display when error is detected When system received error report, Standby LED (red) blinks as follows. POWER LED should keep dark while error indication. 1) Lamp error Blink timing (1 blink/1 period) Light (H) Dark (L) 1000ms 250ms 2) Power module error Blink timing (2 blink/1 period)
  • Page 26 LC-32DH57E/RU/S 16. Upgrading the software 1. Unplug AC cable from outlet. 2. Insert an USB memory that is written a new software to USB port. 3. Keep pressing POWER button on LCD panel and plug AC cable to outlet. 4. POWER LED on panel automatically start blinking. (POWER LED: Both red and green light blinking with sync.
  • Page 27: Chapter 4. Troubleshooting Table Troubleshooting Table

    LC-32DH57E/RU/S CHAPTER 4. LC-32DH57E-BK TROUBLESHOOTING TABLE Service Manual [1] TROUBLESHOOTING TABLE No power supplied (Front LED does not light up). No power-up even if turned on (Front LED light up) Is the power cord connector, AC-IN harness, and PD harness Reconnect the power cord, the AC-IN harness and PD harness cor- connected to the POWER unit normally? rectly.
  • Page 28 LC-32DH57E/RU/S Power supply (troubleshooting): A power supply does not come to each main circuit/IC. (1) The power supply of TUNER (TU1102) does not operate. (IF5V) Checklist 1) The check of the front page POW-UNIT is completed. ••• UR12.5V is output to PD (P9601) (MAIN-UNIT). (If UR12.5V is not output, confirm the POW-UNIT again and repair.) 2) Check that STB3.3V is supplied to pin (V24) of IC3303 (included MICON), and the PS_ON signal “H”...
  • Page 29 LC-32DH57E/RU/S Power supply (troubleshooting): A power supply does not come to each main circuit/IC. (2) The power supply of a VIDEO system does not operate. (IC3303) (BU3.3V), (D3.3V), (D1.1V), (CPU1.2V) Checklist 1) The check of the front page POW-UNIT is completed. ••• UR12.5V is output to PD (P9601) (MAIN-UNIT). (If UR12.5V is not output, confirm the POW-UNIT again and repair.) 2) Check that STB3.3V is supplied to pin (V24) of IC3303 (included MICON), and the PS_ON signal “H”...
  • Page 30 LC-32DH57E/RU/S Power supply (troubleshooting): A power supply does not come to each main circuit/IC. (4) The power supply of a PANEL system does not operate. (Q9606) (LCD12V) Checklist 1) The check of the front page POW-UNIT is completed. ••• UR12.5V is output to PD (P9601) (MAIN-UNIT). (If UR12.5V is not output, confirm the POW-UNIT again and repair.) 2) Check that STB3.3V is supplied to pin (V24) of IC3303 (included MICON), and the PS_ON signal “H”...
  • Page 31 LC-32DH57E/RU/S No sound (1-1) (during the reception of TV broadcasting) No audio output during UHF/ VHF reception Checklist: 1) Is the volume set to MIN or MUTE on the remote control? ••• Set the desired volume. 2) Is ANT-CABLE disconnected or connected improperly? ••• Connect it correctly as per the operation manual. 3) Attention: The terminal of IC3303 (VCT) cannot be actually checked by hiding oneself, and check it with another terminal of the same line, please.
  • Page 32 LC-32DH57E/RU/S No sound (1-2) (during the reception of DTV broadcasting) No audio output during DTV reception Checklist: 1) Is the volume set to MIN or MUTE on the remote control? ••• Set the desired volume. 2) Is ANT-CABLE disconnected or connected improperly? ••• Connect it correctly as per the operation manual. 3) Attention: The terminal of IC3303 (VCT) cannot be actually checked by hiding oneself, and check it with another terminal of the same line, please.
  • Page 33 LC-32DH57E/RU/S No sound from external input devices (2-1)-1 No sound from EXT1 (SCART1) connecting an external input device. <EXT1> Check pins (6) (2) of SCART1 and connection of an external Is the SC1_IN_L (SCART1-L-IN) audio signal input from pin (6) input device.
  • Page 34 LC-32DH57E/RU/S No sound from external input devices (2-2)-1 No sound from EXT3 (COMP-A-IN) connecting an external input device. <EXT3> Is COMP_IN_L audio signal input to pin (2) of EXT3_AUDIO (J502)? Is COMP_IN_R audio signal input to pin (4) of EXT3_AUDIO (J502)? Is COMP_IN_L audio signal input to pin (48) of IC1302 (A-SW)? Is COMP_IN_R audio signal input to pin (47) of IC1302 (A-SW)?
  • Page 35 LC-32DH57E/RU/S No sound from external input devices (2-2)-3 No sound from EXT8 (CVBS-A-IN) connecting an external input device. <EXT8> Is CVBS-L audio signal input to pin (5) of EXT8 (J505)? Is CVBS-R audio signal input to pin (4) of EXT8 (J505)? Is CVBS-L audio signal input to pin (52) of IC1302 (A-SW)? Is CVBS-R audio signal input to pin (51) of IC1302 (A-SW)? Is the audio signal (A_IN_L/R) properly output from pins (6) and...
  • Page 36 LC-32DH57E/RU/S No sound of external device (3-1)-2 No audio output from EXT2 (SCART2) terminal. Checklist: 1) Is the MUTE button on the remote control set to ON? •••• Set to OFF. 2) Check the connection to external devices. ••• Is there any improper connection? Is audio signal output to pins (3) and (1) of EXT2 (SCART2) Check EXT2 (SCART2) (SC502) and the connection to an exter- (SC502)?
  • Page 37 LC-32DH57E/RU/S No sound of external device (3-2) No sound from AUDIO OUT (J506). (MONITOR OUT) Is the audio output signal send to pins (2) and (4) of the AUDIO Check AUDIO OUT terminal (J506) and the connection to an OUT terminal (J506)? external device.
  • Page 38 LC-32DH57E/RU/S No sound of external device (3-3) No DIGITAL sound from OPT OUT (D520). Is the DIGITAL audio signal output to pin (1) of the OPT OUT ter- Check OPT OUT terminal (D520) and the connection to an exter- minal (D520)? nal device.
  • Page 39 LC-32DH57E/RU/S <When tuner (U/V, DTV) is received> No picture on the display (1)-1 No picture appears on LCD during the tuner (U/V) reception. Checklist: on the remote control set up correctly? ••• set it as “TV” with the INPUT SOURCE button 1) Is “INPUT SOURCE”...
  • Page 40 LC-32DH57E/RU/S <When tuner (U/V, DTV) is received> No picture on the display (1)-2 No picture appears on LCD during the tuner (DTV) reception. Checklist: on the remote control set up correctly? ••• set it as “TV” with the INPUT SOURCE button 1) Is “INPUT SOURCE”...
  • Page 41 LC-32DH57E/RU/S <When EXT1 is used for external input> No picture on the display (2)-1 No Composite video output when the EXT1 external input is used. Checklist: on the remote control set up correctly? ••• set it as “EXT1” with the INPUT SOURCE button on the remote 1) Is “INPUT SOURCE”...
  • Page 42 LC-32DH57E/RU/S <When EXT1 is used for external input> No picture on the display (2)-2 No RGB output when the EXT1 external input is used. Checklist: on the remote control set up correctly? ••• set it as “EXT1” with the INPUT SOURCE button on the remote 1) Is “INPUT SOURCE”...
  • Page 43 LC-32DH57E/RU/S <When EXT1 is used for external input> No picture on the display (2)-3 No Y/C output when the EXT1 external input is used. Checklist: on the remote control set up correctly? ••• set it as “EXT1” with the INPUT SOURCE button on the remote 1) Is “INPUT SOURCE”...
  • Page 44 LC-32DH57E/RU/S <When EXT2 is used for external input> No picture on the display (3)-1 No composite video output when the EXT2 external input is used. Checklist: on the remote control set up correctly? ••• set it as “EXT2” with the INPUT SOURCE button on the remote con- 1) Is “INPUT SOURCE”...
  • Page 45 LC-32DH57E/RU/S <When EXT2 is used for external input> No picture on the display (3)-2 No Y/C output when the EXT2 external input is used. Checklist: on the remote control set up correctly? ••• set it as “EXT2” with the INPUT SOURCE button on the remote con- 1) Is “INPUT SOURCE”...
  • Page 46 LC-32DH57E/RU/S <When EXT3/4/8 is used for external input> No picture on the display (4)-1 No Component video output when the EXT3 external input is used. Checklist: on the remote control set up correctly? ••• set it as “EXT3”/”EXT4”/”EXT8” with the INPUT SOURCE button on 1) Is “INPUT SOURCE”...
  • Page 47 LC-32DH57E/RU/S <When EXT3/4/8 is used for external input> No picture on the display (4)-2 No PC output when the EXT4 external input is used. Checklist: on the remote control set up correctly? ••• set it as “EXT3”/”EXT4”/”EXT8” with the INPUT SOURCE button on 1) Is “INPUT SOURCE”...
  • Page 48 LC-32DH57E/RU/S <When EXT3/4/8 is used for external input> No picture on the display (4)-3 No Composite video output when the EXT8 external input is used. Checklist: on the remote control set up correctly? ••• set it as “EXT3”/”EXT4”/”EXT8” with the INPUT SOURCE button on 1) Is “INPUT SOURCE”...
  • Page 49 LC-32DH57E/RU/S <When EXT5/6/7(HDMI) is used for external input> No picture on the display (5)-1 No HDMI0 digital video output when the EXT5 external input is used. Checklist: on the remote control set up correctly? ••• set it as “EXT5”/”EXT6”/”EXT7” with the INPUT SOURCE button on 1) Is “INPUT SOURCE”...
  • Page 50 LC-32DH57E/RU/S <When EXT5/6/7(HDMI) is used for external input> No picture on the display (5)-2 No HDMI1 digital video output when the EXT6 external input is used. Checklist: on the remote control set up correctly? ••• set it as “EXT5”/”EXT6”/”EXT7” with the INPUT SOURCE button on 1) Is “INPUT SOURCE”...
  • Page 51 LC-32DH57E/RU/S <When EXT5/6/7 (HDMI) is used for external input> No picture on the display (5)-3 No HDMI2 digital video output when the EXT7 external input is used. Checklist: on the remote control set up correctly? ••• set it as “EXT5”/”EXT6”/”EXT7” with the INPUT SOURCE button on 1) Is “INPUT SOURCE”...
  • Page 52 LC-32DH57E/RU/S <When an external monitor is connected> No picture on the external monitor (6)-1 No picture appears on external monitor during the tuner (U/V) reception. (Tuner input, EXT1 output) Checklist: on the remote control set up correctly? ••• See the operation manual and 1) Are input terminal on back of TV and “INPUT SOURCE”...
  • Page 53 LC-32DH57E/RU/S <When an external monitor is connected> No picture on the external monitor (6)-2 No picture appears on external monitor during the EXT8 input (COMPOSITE). (EXT8 COMP input, EXT2 output) Checklist: on the remote control set up correctly? ••• See the operation manual and 1) Are input terminal on back of TV and “INPUT SOURCE”...
  • Page 54 LC-32DH57E/RU/S <When an external monitor is connected> No picture on the external monitor (6)-3 No picture appears on external monitor during the EXT5/6/7 inputs (HDMI). (EXT5 HDMI input, EXT2 output) Checklist: on the remote control set up correctly? ••• See the operation manual and 1) Are input terminal on back of TV and “INPUT SOURCE”...
  • Page 55 LC-32DH57E/RU/S The backlight does not light up. Do all the fluorescent tubes light up? Check each fluorescent tube and exchange defective fluorescent tubes. Is 60V supplied to Connector (CN7302) (20-23) pin? Refer to troubleshooting “No power supply (Front LED does not light up)”...
  • Page 56 LC-32DH57E/RU/S LCD failure (1) Does a single or several Does a single or several Do luminescent or black Is the on-screen image Is there any portion vertical stripes appear horizontal stripes appear dots appear on the rippling or distorted? which some screens on the LCD screen? on the LCD screen? screen?
  • Page 57: Chapter 5. Major Ic Infomations

    LC-32DH57E/RU/S CHAPTER 5. LC-32DH57E-BK MAJOR IC INFOMATIONS Service Manual [1] MAJOR IC INFOMATIONS 1. DESCRIPTION OF MAJOR ICs Drawing Ref No. Name Part Code Description [MAIN UNIT] IC1301 VHiAK4341ED-1Y AK4341 is 24 bits DAC of 2Vrms output. A newly developed advanced 1/10 multiple bit system is adopted in the modulator.
  • Page 58 LC-32DH57E/RU/S Drawing Ref No. Name Part Code Description IC4402 VHiAOZ1320C-1Y SMART LOAD SW The AOZ1320 is a P-channel high-side load switch with controlled 7/10 slew rate. AOZ1320-04 have a slew rate of 1ms. IC4401 VHiMT8295AE-1Q IC Controller This is a control IC for PCMCIA cards. This controls information on IC 7/10 cards inserted into the PCMCIA card slot (SC4401) or information on software version upgrade cards saved on flash memories to transfer...
  • Page 59: Chapter 6. Block Diagram/Wiring Diagram System Block Diagram

    LC-32DH57E/RU/S 2. Detailed ICs Information 2.1. IC1301 (VHiAK4341ED-1Y) 2.1.1 Block Diagram 2.1.2 Pin Connections and short description Pin No. Pin Name Pin Function MCLK Master clock input pin. An external TTL clock should be input on this pin. BICK Audio serial data clock pin. SDTI Audio serial data input pin.
  • Page 60 LC-32DH57E/RU/S 2.2. IC1302 (VHiMT8292N+-1Y) 2.2.1 Block Diagram 5 – 4...
  • Page 61 LC-32DH57E/RU/S 2.2.2 Pin Connections and short description Pin No. Pin Name Pin Function sheet name AIN8R Channel 8 right input. open AIN8L Channel 8 left input. open MVDD33 — Multiplexer positive supply 3.3 voltage. — VCM33 Multiplexer midrail divider decoupling pin. C-GND MGND33 —...
  • Page 62 LC-32DH57E/RU/S 2.3. IC1303, IC9607 (VHiS80944NM-1Y) 2.3.1 Block Diagram 2.3.2 Pin Connections and short description Pin No. Pin Name Pin Function Voltage detection output terminal (RESET detecting voltage). — Voltage input terminal. — Ground terminal. — No connection (It is an opening electrically.) External capacitor connection terminal for delay.
  • Page 63 LC-32DH57E/RU/S 2.4. IC506 (VHiM3221EiP-1Y) This IC is a block diagram and description LC-19D1E (S58J9LC19D1ES) please see the service manual. 2.5. IC1508 (VHiSii91873-1Q) 2.5.1 Block Diagram 5 – 7...
  • Page 64 LC-32DH57E/RU/S 2.5.2 Pin Connections and short description Pin No. Pin Name Pin Function HDMI RX Port Pins R0X0P TMDS input port 0 data pairs. R0X0N R0X1P R0X1N R0X2P R0X2N R0XCP TMDS input port 0 clock pair. R0XCN R1X0P TMDS input port 1 data pairs. R1X0N R1X1P R1X1N...
  • Page 65 LC-32DH57E/RU/S Pin No. Pin Name Pin Function Control Pins CSCL Local Configuration/Status I2C Clock. Chip configuration/status is accessed via this I2C port. This pin is a true open drain, so it does not pull to ground if power is not applied. CSDA Local Configuration/Status I2C Data.
  • Page 66 LC-32DH57E/RU/S 2.6. IC3302 (VHiBD6538G+-1Y) 2.6.1 Block Diagram 2.6.2 Pin Connections and short description Pin No. Pin Name Pin Function Power supply input terminal. It is an input terminal to the switch and a power supply input terminal of an internal circuit. —...
  • Page 67 LC-32DH57E/RU/S 2.7. IC3304 (VHiS80928NM-1Y), IC3305 (VHiS80920NM-1Y) 2.7.1 Block Diagram 2.7.2 Pin Connections and short description Pin No. Pin Name Pin Function Voltage detection output terminal. (RESET detecting voltage) — Voltage input terminal. — Ground terminal. — No connection (It is an opening electrically.) External capacitor connection terminal for delay.
  • Page 68 LC-32DH57E/RU/S 2.8. IC3501, IC3502 (RH-iXC505WJQZQ) 2.8.1 Block Diagram 2.8.2 Pin Connections and short description Pin No. Pin Name Pin Function J8, K8 CK, CK# Clock: CK and CK# are differential clock inputs. All address and control input signals are sampled on the crossing of the positive edge of CK and negative edge of CK#.
  • Page 69 LC-32DH57E/RU/S Pin No. Pin Name Pin Function On Die Termination: ODT (registered HIGH) enables termination resistance internal to the DDR2 SDRAM. When enabled, ODT is only applied to each DQ, DQS, DQS#, RDQS, RDQS#, and DM signal for x4/x8 configuration. For x16 configuration, ODT is applied to each DQ, UDQS/UDQS#.
  • Page 70 LC-32DH57E/RU/S 2.9. IC8403 (RH-iXC788WJZZY) 2.9.1 Block Diagram 2.9.2 Pin Connections and short description Pin No. Pin Name Pin Function Places device in active power mode when driven low. (Chip Select) Deselects device and places SO at high impedance when high. After power-up, device requires a falling edge on CS# before any command is written.
  • Page 71 LC-32DH57E/RU/S 2.10. IC8401 (RH-iXC721WJQZQ) 2.10.1 Block Diagram 5 – 15...
  • Page 72 LC-32DH57E/RU/S 2.10.2 Pin Connections and short description Pin No. Pin Name Pin Function 29-44 IO0-IO7 DATA INPUTS/OUTPUTS The IO pins allow to input command, address and data and to output data during read/program opera- tions. The inputs are latched on the rising edge of Write Enable (WE#). The I/O buffer float to High-Z when the device is deselected or the outputs are disabled.
  • Page 73 LC-32DH57E/RU/S 2.12. IC4402 (VHiAOZ1320C-1Y) 2.12.1 Block Diagram 2.12.2 Pin Connections and short description Pin No. Pin Name Pin Function Output. OUT is the source of the P-channel MOSFET. — Ground Enable. The P-channel MOSFET turns on when EN is logic HIGH. —...
  • Page 74 LC-32DH57E/RU/S 2.13. IC4401 (VHiMT8295AE-1Q) 2.13.1 Block Diagram 2.13.2 Pin Connections and short description Pin No. Pin Name Pin Function Sheet Name Miscellaneous RESETB Chip reset. CI_CNT_RESET CI_INT interrupt. CI_CNT_INT NAND flash CI_DATA0 NAND Flash Data bit 0. PDD0_ CI_DATA1 NAND Flash Data bit 1. PDD1_ CI_DATA2 NAND Flash Data bit 2.
  • Page 75 LC-32DH57E/RU/S Pin No. Pin Name Pin Function Sheet Name CI_RB NAND Flash Ready. N_PARB_ CI_WEB NAND Flash Write enable. XEWE_ CI_ALE NAND Flash Address Latch enable. PAALE_ CI_CLE NAND Flash Command Latch enable. PACLE_ CI_OEB NAND Flash Output enable. XERE_ CLK/Crystal XTALO Crystal output.
  • Page 76 LC-32DH57E/RU/S Pin No. Pin Name Pin Function Sheet Name PCMCIA address bit 4. CI_A4 PCMCIA address bit 5. CI_A5 PCMCIA address bit 6. CI_A6 PCMCIA address bit 7. CI_A7 PCMCIA address bit 8. CI_A8 PCMCIA address bit 9. CI_A9 PCMCIA address bit 10. CI_A10 PCMCIA address bit 11.
  • Page 77 LC-32DH57E/RU/S 2.14. IC2701 (VHiYDA148QZ-1Y) This IC is a block diagram and description LC-32A47E/RU/V (S59Z4LC32A47E) please see the service manual. 2.15. IC9605/IC9608 (VHiLV5893M+-1Y) 2.15.1 Block Diagram 2.15.2 Pin Connections and short description Pin No. Pin Name Pin Function BOOT Upper part MOS transistor boot strap capacity connection terminal. Connect the boot capacity of about 0.022µF between SW terminals.
  • Page 78 LC-32DH57E/RU/S 2.17. IC9611 (VHiTCR5SB25-1Y) 2.17.1 Pin Connections and short description Pin No. Pin Name Pin Function Input power source terminal. A small, ceramic type can be used for the input capacitor (0.1µF). — Ground CONTROL Control terminal. In control voltage ON, it is 1.5-6V, and turning off is 0.25V or less. Control voltage Output voltage HIGH...
  • Page 79 LC-32DH57E/RU/S 2.19. IC2601, IC9601 (VHiHC2G66DP-1Y) 2.19.1 Block Diagram 2.19.2 Pin Connections and short description Pin No. Pin Name Pin Function Independent input or output. Independent input or output. Enable input (active HIGH). — Ground Independent input or output. Independent input or output. Enable input (active HIGH).
  • Page 80 LC-32DH57E/RU/S — M E M O — 5 – 24...
  • Page 81 LC-32DH57E/RU/S CHAPTER 6. LC-32DH57E-BK BLOCK DIAGRAM/WIRING DIAGRAM Service Manual [1] SYSTEM BLOCK DIAGRAM SYSTEM BLOCK DIAGRAM 6 – 1...
  • Page 82: Overall Wiring Diagram

    LC-32DH57E/RU/S [2] OVERALL WIRING DIAGRAM OVERALL WIRING DIAGRAM 6 – 2...
  • Page 83: Chapter 7. Printed Wiring Board

    LC-32DH57E/RU/S CHAPTER 7. LC-32DH57E-BK PRINTED WIRING BOARD Service Manual [1] MAIN UNIT PRINTED WIRING BOARD MAIN Unit (Side-A) 7 – 1...
  • Page 84 LC-32DH57E/RU/S MAIN Unit (Chip PArts Side-A) SC1503 R1506 R1512 FB526 FB524 C560 R605 R600 R1509 VA3301 VA3302 R1511 C3398 C1509 R522 R533 R625 D515 R631 R630 R629 TH3302 C3386 TH3301 VA508 VA509 C534 R553 R544 R518 C535 R552 R1527 R1526 R1536 SC1502 R514...
  • Page 85 LC-32DH57E/RU/S MAIN Unit (Side-B) 7 – 3...
  • Page 86 LC-32DH57E/RU/S MAIN Unit (Chip Parts Side-B) Q1501 FB3315 D1508 R549 R4427 R4428 R4426 R1516 C1506 R1529 C1504 R1503 C1508 R1519 D1514 R573 D1523 C4418 R1530 C4414 R4418 FB4404 FB4405 R8607 C4415 IC4402 C8628 R8606 R4422 R8615 R8617 R8613 R8616 C8634 IC8401 R572 R8610...
  • Page 87: Led Unit/Key Unit Printed Wiring Board

    LC-32DH57E/RU/S [2] LED UNIT/KEY UNIT PRINTED WIRING BOARD LED Unit (Side-A) LED Unit (Chip Parts Side-A) LED Unit (Side-B) KEY Unit (Side-A) C106 D101 C105 R136 R107 Q103 R108 R110 R105 R102 R117 P101 7 – 5...
  • Page 88: Power Unit Printed Wiring Board

    LC-32DH57E/RU/S [3] POWER UNIT PRINTED WIRING BOARD POWER Unit (Side-A) 7 – 6...
  • Page 89 LC-32DH57E/RU/S POWER Unit (Chip Parts Side-A) R7233 R7260 R7222 R7244 R7102 R7263 C7204 C7105 Q7203 R7103 Q7205 Q7209 R7135 IC7101 R7235 R7236 R7212 R7230 C7217 D7219 R7117 D7110 Q7208 D7207 R7130 C7230 Q7206 D7220 R7234 R7237 C7214 C7229 Q7207 R7228 R7249 R7209 C7115...
  • Page 90: Inverter Unit Printed Wiring Board

    LC-32DH57E/RU/S [4] INVERTER UNIT PRINTED WIRING BOARD INVERTER Unit (Side-A) 7 – 8...
  • Page 91 LC-32DH57E/RU/S INVERTER Unit (Chip Parts Side-A) D7903 D7902 D7901 D7904 Q7903 D7900 Q7902 Q7904 D7905 Q7901 Q7900 Q7905 Q7708 Q7709 Q7704 Q7701 Q7906 Q7705 Q7801 Q7800 Q7706 Q7707 Q7803 Q7805 IC7900 Q7700 IC7700 Q7703 Q7802 Q7804 Q7806 Q7808 Q7702 7 – 9...
  • Page 92: Description Of Schematic Dia

    LC-32DH57E/RU/S CHAPTER 8. LC-32DH57E-BK SCHEMATIC DIAGRAM Service Manual [1] DESCRIPTION OF SCHEMATIC DIAGRAM VOLTAGE MEASUREMENT CONDITION: 1. The voltages at test points are measured on exclusive AC adaptor and the stable supply voltage of AC 220-240V. Signals are fed by a colour bar signal generator for servicing purpose and the above voltages are measured with a 20k ohm/V tester. INDICATION OF RESISTOR &...
  • Page 93 LC-32DH57E/RU/S [2] SCHEMATIC DIAGRAM MAIN Unit-1 AND SHADED COMPONENTS=SAFETY RELATED PARTS 8 – 2...
  • Page 94 LC-32DH57E/RU/S MAIN Unit-2 8 – 3...
  • Page 95 LC-32DH57E/RU/S MAIN Unit-3 8 – 4...
  • Page 96 LC-32DH57E/RU/S MAIN Unit-4 8 – 5...
  • Page 97 LC-32DH57E/RU/S MAIN Unit-5 8 – 6...
  • Page 98 LC-32DH57E/RU/S MAIN Unit-6 8 – 7...
  • Page 99 LC-32DH57E/RU/S MAIN Unit-7 8 – 8...
  • Page 100 LC-32DH57E/RU/S MAIN Unit-8 8 – 9...
  • Page 101 LC-32DH57E/RU/S MAIN Unit-9 8 – 10...
  • Page 102 LC-32DH57E/RU/S MAIN Unit-10 8 – 11...
  • Page 103 LC-32DH57E/RU/S LED Unit 8 – 12...
  • Page 104 LC-32DH57E/RU/S KEY Unit 8 – 13...
  • Page 105 LC-32DH57E/RU/S POWER Unit AND SHADED COMPONENTS=SAFETY RELATED PARTS 8 – 14...
  • Page 106 LC-32DH57E/RU/S INVERTER Unit AND SHADED COMPONENTS=SAFETY RELATED PARTS 8 – 15...
  • Page 107: Parts Guide

    LC-32DH57E/RU/S PartsGuide PARTS GUIDE No. S59Z3LC32DH57 LCD COLOUR TELEVISION LC-32DH57E/RU/S MODELS CONTENTS PRINTED WIRING BOARD DUNTKF071FM04 ASSEMBLIES (INVERTER Unit) LCD PANEL CABINET AND MECHANICAL PARTS DUNTKF111FM08 (MAIN Unit) LCD PANEL MODULE DUNTKF115FM02 (LED Unit) [10] SUPPLIED ACCESSORIES DUNTKF069FM05 (KEY Unit) [11] PACKING PARTS (NOT REPLACEMENT ITEM) DUNTKF063FM01 (POWER Unit)
  • Page 108 LC-32DH57E/RU/S PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [1] PRINTED WIRING BOARD ASSEMBLIES MAIN Unit (B3KU2H57CG) DUNTKF111FM08 LED Unit (B3KU2H57CJ) DUNTKF115FM02 KEY Unit (B3KU2A47CK) DUNTKF069FM05 POWER Unit DUNTKF063FM01 INVERTER Unit DUNTKF071FM04 LCD CONTROL Unit (Unit Replacement Item) RUNTKA561WJZZ GND PWB Unit RUNTKA550WJZZ [2] LCD PANEL 32"...
  • Page 109 LC-32DH57E/RU/S PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [3] DUNTKF111FM08 (MAIN Unit) C591 Capacitor RC-KZA616WJQZY C592 Capacitor 0.1 10V Ceramic VCKYCZ1AB104KY C593 Capacitor RC-KZA616WJQZY C1101 Capacitor 33 10V Capacitor(AL) VCERML1AN336MY C1102 Capacitor 1000p 50V Ceramic VCKYCZ1HB102KY C1103 Capacitor 0.01 25V Ceramic VCKYCZ1EB103KY C1104 Capacitor 100 16V Capacitor(AL)
  • Page 110 LC-32DH57E/RU/S PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [3] DUNTKF111FM08 (MAIN Unit) C2718 Capacitor 0.47 25V Ceramic VCKYTV1EB474KY C2719 Capacitor 0.47 25V Ceramic VCKYTV1EB474KY C2720 Capacitor 0.47 25V Ceramic VCKYTV1EB474KY C2721 Capacitor 0.47 25V Ceramic VCKYTV1EB474KY C2723 Capacitor RC-KZA114WJZZY C2724 Capacitor RC-KZA114WJZZY...
  • Page 111 LC-32DH57E/RU/S PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [3] DUNTKF111FM08 (MAIN Unit) C3390 Capacitor RC-KZA510WJPZY C3391 Capacitor 0.047 10V Ceramic VCKYCZ1AB473KY C3392 Capacitor RC-KZA510WJPZY C3393 Capacitor RC-KZA510WJPZY C3394 Capacitor RC-KZA510WJPZY C3395 Capacitor RC-KZA510WJPZY C3396 Capacitor RC-KZA510WJPZY C3397 Capacitor RC-KZA510WJPZY C3399 Capacitor 0.022 16V Ceramic VCKYCZ1CB223KY...
  • Page 112 LC-32DH57E/RU/S PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [3] DUNTKF111FM08 (MAIN Unit) C9624 Capacitor 6800p 25V Ceramic VCKYCZ1EB682KY C9625 Capacitor RC-KZA114WJZZY C9626 Capacitor 0.022 16V Ceramic VCKYCZ1CB223KY C9627 Capacitor 6800p 25V Ceramic VCKYCZ1EB682KY C9628 Capacitor 0.01 25V Ceramic VCKYCZ1EB103KY C9629 Capacitor 0.022 16V Ceramic VCKYCZ1CB223KY...
  • Page 113 LC-32DH57E/RU/S PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [3] DUNTKF111FM08 (MAIN Unit) D9603 Diode MA2J1110GL VHDMA111G++-1Y D9604 Diode MA2J1110GL VHDMA111G++-1Y D9605 Diode MAZ8043GML RH-EXA514WJZZY D9606 Diode 1SS226(T5L,F,T) VHD1SS226//-1Y D9607 Diode MA2J1110GL VHDMA111G++-1Y D9608 Diode MAZ8024G0L RH-EXA502WJZZY D9609 Diode MA2J1110GL VHDMA111G++-1Y D9610 Diode RB056L-40TE25...
  • Page 114 LC-32DH57E/RU/S PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [3] DUNTKF111FM08 (MAIN Unit) FL503 Filter RFiLN0003TAZZY FL504 Filter RFiLN0017TAZZY FL507 Filter RFiLN0017TAZZY FL508 Filter RFiLN0017TAZZY FL509 Filter RFiLN0017TAZZY FL510 Filter RFiLN0017TAZZY FL511 Filter RFiLN0017TAZZY FL512 Filter RFiLN0017TAZZY FL513 Filter RFiLN0017TAZZY FL514 Filter RFiLN0003TAZZY...
  • Page 115 LC-32DH57E/RU/S PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [3] DUNTKF111FM08 (MAIN Unit) LUG9605 QLUGHA009WJZZY LUG9607 QLUGHA009WJZZY LUG9608 QLUGHA009WJZZY P2601 Plug QCNCWA671WJQZY P2604 Plug QPLGNA335WJZZY P2701 Plug QPLGNA173WJZZY P3301 Plug QPLGNA331WJZZY P9601 Plug QPLGNA168WJZZY P9602 Plug QPLGNA328WJZZY Q501 Transistor IMH23T110 VSiMH23T110-1Y Q502 VSiMH23T110-1Y...
  • Page 116 LC-32DH57E/RU/S PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [3] DUNTKF111FM08 (MAIN Unit) R575 Resistor 1k 1/16W Metal Oxide VRS-CZ1JF102JY R576 Resistor 1k 1/16W Metal Oxide VRS-CZ1JF102JY R577 Resistor 2.7k 1/16W Metal Composition VRK-SA1JF272JY R578 Resistor 1k 1/16W Metal Oxide VRS-CZ1JF102JY R579 Resistor 1k 1/16W Metal Oxide...
  • Page 117 LC-32DH57E/RU/S PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [3] DUNTKF111FM08 (MAIN Unit) R1302 Resistor 10k 1/16W Metal Oxide VRS-CZ1JF103JY R1304 Resistor 10k 1/16W Metal Oxide VRS-CZ1JF103JY R1305 Resistor 10k 1/16W Metal Oxide VRS-CZ1JF103JY R1306 Resistor 0 1/16W Metal Oxide VRS-CZ1JF000JY R1307 Resistor 0 1/16W Metal Oxide...
  • Page 118 LC-32DH57E/RU/S PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [3] DUNTKF111FM08 (MAIN Unit) R3312 Resistor 1k 1/16W Metal Oxide VRS-CZ1JF102FY R3313 Resistor 1k 1/16W Metal Oxide VRS-CZ1JF102FY R3314 Resistor 1k 1/16W Metal Oxide VRS-CZ1JF102FY R3315 Resistor 10k 1/16W Metal Oxide VRS-CZ1JF103JY R3317 Resistor 100 1/16W Metal Oxide...
  • Page 119 LC-32DH57E/RU/S PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [3] DUNTKF111FM08 (MAIN Unit) R3508 Resistor 0 1/16W Metal Composition VRK-SA1JF000JY R3509 Resistor 0 1/16W Metal Composition VRK-SA1JF000JY R3510 Resistor 22 1/32W Metal Composition VRK-SB1FF220JY R3513 Resistor 22 1/32W Metal Composition VRK-SB1FF220JY R3514 Resistor 22 1/32W Metal Composition...
  • Page 120 LC-32DH57E/RU/S PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [3] DUNTKF111FM08 (MAIN Unit) R9635 Resistor 10k 1/16W Metal Oxide VRS-CZ1JF103JY R9636 Resistor 10k 1/16W Metal Oxide VRS-CZ1JF103JY R9637 Resistor 100 1/16W Metal Oxide VRS-CZ1JF101JY R9638 Resistor 30k 1/16W Metal Oxide VRS-CZ1JF303FY R9639 Resistor 5.6k 1/16W Metal Oxide...
  • Page 121 LC-32DH57E/RU/S PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [6] DUNTKF063FM01 (POWER Unit) C7002 Capacitor RC-FZA562WJZZ C7011 RC-KZA550WJZZ Capacitor C7021 Capacitor RC-FZA560WJZZ C7024 Capacitor RC-KZA550WJZZ C7027 Capacitor RC-KZA550WJZZ C7101 Capacitor 0.22 16V Ceramic VCKYCY1CB224KY C7102 Capacitor 1200p 50V Ceramic VCCCCY1HH122JY C7105 Capacitor 0.1 50V Ceramic VCKYCY1HB104KY...
  • Page 122 LC-32DH57E/RU/S PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [6] DUNTKF063FM01 (POWER Unit) D7230 Diode MA2J1110GL VHDMA111G++-1Y D7231 Diode D1FL20U-5053 VHDD1FL20U/-1Y D7234 Diode MAZ8330GML RH-EXA578WJZZY EY7101 Eyelet Screw LX-GZ3001PEZZ EY7102 Eyelet Screw LX-GZ3001PEZZ EY7105 Eyelet Screw LX-GZ3001PEZZ EY7106 Eyelet Screw LX-GZ3001PEZZ EY7107 Eyelet Screw...
  • Page 123 LC-32DH57E/RU/S PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [6] DUNTKF063FM01 (POWER Unit) R7234 Resistor 39k 1/16W Metal Oxide VRS-CY1JF393FY R7235 Resistor 20k 1/16W Metal Oxide VRS-CY1JF203FY R7236 Resistor 22k 1/16W Metal Oxide VRS-CY1JF223FY R7237 Resistor 39k 1/16W Metal Oxide VRS-CY1JF393FY R7238 Resistor 10k 1/16W Metal Oxide...
  • Page 124 LC-32DH57E/RU/S PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [7] DUNTKF071FM04 (INVERTER Unit) C7904 Capacitor RC-CZA007WJZZ+ C7905 Capacitor RC-CZA007WJZZ+ C7906 Capacitor 1200p 50V Ceramic VCCCCY1HH122JY C7907 Capacitor 1200p 50V Ceramic VCCCCY1HH122JY C7908 Capacitor RC-CZA007WJZZ+ C7909 Capacitor RC-CZA007WJZZ+ C7910 Capacitor 1200p 50V Ceramic VCCCCY1HH122JY C7911 Capacitor 1200p 50V Ceramic...
  • Page 125 LC-32DH57E/RU/S PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [7] DUNTKF071FM04 (INVERTER Unit) R7719 Resistor 39k 1/16W Metal Oxide VRS-CY1JF393FY R7720 Resistor 220 1/16W Metal Oxide VRS-CY1JF221DY R7721 Resistor 62k 1/16W Metal Oxide VRS-CY1JF623JY R7722 Resistor 100k 1/16W Metal Oxide VRS-CY1JF104JY R7724 Resistor 9.1k 1/16W Metal Oxide...
  • Page 126 LC-32DH57E/RU/S PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [7] DUNTKF071FM04 (INVERTER Unit) R7941 Resistor 820 1/10W Metal Oxide VRS-TV1JD821FY R7942 Resistor 820 1/10W Metal Oxide VRS-TV1JD821FY R7943 Resistor 820 1/10W Metal Oxide VRS-TV1JD821FY R7944 Resistor 820 1/10W Metal Oxide VRS-TV1JD821FY R7945 Resistor 820 1/10W Metal Oxide...
  • Page 127 LC-32DH57E/RU/S [8] CABINET AND MECHANICAL PARTS 3-2 3-1...
  • Page 128 LC-32DH57E/RU/S PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [8] CABINET AND MECHANICAL PARTS Front Cabinet Ass'y CCABAC243WJ07 Front Cabinet Not Available LED Cover Not Available Not Available Decoration Screw XEBS730P08000 Rear Cabinet Ass'y CCABBB470WJ01 Rear Cabinet Not Available VESA Holder, x4 Not Available Spacer (0.5x10x30), x6 Not Available...
  • Page 129 LC-32DH57E/RU/S [9] LCD PANEL MODULE...
  • Page 130 LC-32DH57E/RU/S PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [9] LCD PANEL MODULE 32" LCD Panel Module R1LK315T3GW40Y Panel Angle Unit Bottom CANGKC067WJ01 Panel Angle Unit L CANGKC068WJ01 CANGKC069WJ01 Panel Angle Unit Top R Panel Angle Unit Top L CANGKC115WJ01 Dust Cover Unit L CCOVMA043WJ01 Dust Cover Unit S...
  • Page 131 LC-32DH57E/RU/S [10] SUPPLIED ACCESSORIES X1-1 X1-2 X11 X12 X13 X14 PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [10] SUPPLIED ACCESSORIES Stand Unit CDAi-A542WJ02 X1-1 Stand Base Not Available X1-2 Screw Ass'y Not Available AC Cord (except U.K. and Ireland) QACCKA024WJPZ QACCBA073WJPZ AC Cord (for U.K.
  • Page 132 LC-32DH57E/RU/S [11] PACKING PARTS (NOT REPLACEMENT ITEM)
  • Page 133 LC-32DH57E/RU/S PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [11] PACKING PARTS (NOT REPLACEMENT ITEM) Packing Case SPAKCE791WJZZ Cover Sheet SPAKAA373WJZZ Mirror Mat Sup SPAKFB730WJZZ SPAKFB732WJZZ Stand Case Wrapping Paper SPAKPA382WJZZ Mirror Mat Base SPAKPB304WJZZ Packing Add. SPAKXC379WJZZ Polyethylene Bag SSAKAA111WJZZ Polyethylene Bag (for Screw) SSAKHA049WJZZ...
  • Page 134 LC-32DH57E/RU/S COPYRIGHT © 2009 BY SHARP CORPORATION ALL RIGHTS RESERVED. No Part of this publication may be reproduced, stored in a retrieval system, or transmitted in any from or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

This manual is also suitable for:

Lc-32dh57e

Table of Contents