Auto Installation; Programme Setup; Auto Search - Sharp Aquos LC-32D53X Operation Manual

Basic adjustment settings (Analogue)

Auto installation

You can run auto installation again, even after setting
up the preset channels.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Auto Installation", and
3
then press ENTER.
[ Setup ... Auto Installation ]
MENU
Setup
Auto Installation

Programme Setup

Child Lock
Input Skip
Input Label
Position
WSS
4:3 Mode
Standby Mode
Language
Text Language
Reset
If you have already set the password, enter it
4
here.
• See page 38 for setting a password.
Press a / b to select "Yes", and then press
5
ENTER.
Press a / b to select the desired language
6
listed on the screen, and then press ENTER.
Press a / b to select the desired sound
system, and then press ENTER.
You do not need to do anything during the

auto search.

"Search is completed." is displayed. Press
MENU to exit.
Option
Programme setup
You can run the auto search procedure again at any
time by accessing the Setup menu and Programme
Setup. Channels can be tuned automatically or
manually.
Auto search
You can also automatically search by performing
the procedure below. This is the same function as
programme auto search in auto installation.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Programme Setup", and
3
then press ENTER.
If you have already set the password, enter it
here.
• See page 38 for setting a password.
[ Setup ... Programme Setup ]
MENU
Setup
Auto Installation
Programme Setup
Child Lock
Input Skip
Input Label
Position
WSS
4:3 Mode
Standby Mode
Language
Text Language
Reset
Press a / b to select "Auto Search", and then
4
press ENTER.
Press a / b to select "Yes", and then press
5
ENTER.
Press a / b to select the desired sound
system, and then press ENTER.
"Search is completed." is displayed. Press
MENU to exit.
Option
19