Supplied Accessories; Quick Guide; Attaching The Stand - Sharp Aquos LC-32RD2E Operation Manual

Supplied accessories

Remote control unit (g1)
Pages 5 and 6
Cable clamp
(Smallg1, Largeg1)
Page 4
• "AAA" size battery (g2) ...... Page 5

Quick guide

Attaching the stand

Before performing work spread cushioning over the base area to lay the TV on, making sure the area is
completely flat. This will prevent it from being damaged.
Before attaching (or detaching) stand, unplug the AC cord from the AC INPUT terminal.
1
Confirm the 8 screws supplied with the TV.
Short screws (m4)
(used in step 2)
2
Attach the two parts of the stand unit to each other
using the 4 short screws as shown.
AC cord (g1)
(For Europe, except
U.K. and Eire)
U.K. type 3-pin AC cord is only
included with models LC-32RD2E,
LC-37RD2E,LC-42RD2E.
Page 4
3 RCA to 15-pin D-sub
adapter (g1)
Page 9
• Operation manual (This publication)
Long screws (m4)
(used in step 3)
(For U.K. and Eire)
3
1 Insert the stand into the opening on the bottom
of the TV.
2 Insert and tighten the 4 long screws on the
rear of the TV as shown.
NOTE
• To detach the stand, perform the above steps in reverse
order.
Cable tie (g1)
Page 4
Stand unit (g1)
Page 3
3