Fine Sync; Xga Mode; Position; Wss (Wide Screen Signalling) - Sharp Aquos LC-32RD2E Operation Manual

Menu operations

Fine Sync.

Menu Operation: C (page 12)
Ordinarily, the TV automatically adjusts image positions
coming from PC (Auto Sync. function). In some cases,
however, manual adjustment is needed to optimise the
image.
Item
H-Pos.: Centres the image by moving it to the left or right.
V-Pos.: Centres the image by moving it up or down.
Clock: Adjusts when the image flickers with vertical
stripes.
Phase: Adjusts when characters have low contrast or
when the image flickers.
NOTE
• If you need to adjust the image position, adjust the position
using your PC.

XGA Mode

Menu Operation: C (page 12)
You can select one of the 3 input signals listed below
to adjust the picture resolution when the PC input is
an XGA signal.
NOTE
• Depending on the graphics card, resolutions of 1360 g
768 may not display correctly.

Position

Menu Operation: C (page 12)
For adjusting a picture's horizontal and vertical
position.
Item
H-Pos.: Centres the image by moving it to the left or right.
V-Pos.: Centres the image by moving it up or down.
NOTE
• Adjustments are stored separately according to input
source.
• Depending on the input signal type a position setting may
not be available.

WSS (Wide Screen Signalling)

Menu Operation: A (page 12)
WSS allows a television to switch automatically among
the different screen formats.
NOTE
• Use WIDE MODE if an image does not switch to the correct
screen format. When the broadcast signal contains no
WSS information, the function will not work even if enabled.
(See page 20.)
18
PC only
PC only
1024 g 768
1280 g 768
1360 g 768
TV/DTV/AV only
TV/DTV/AV only

4:3 Mode

Menu Operation: A (page 12)
The WSS signal has 4:3 auto-switching that allows you
to select between Normal and Panorama.
Item
Normal: Normal range keeping 4:3 or 16:9 aspect ratio
Panorama: Wide image without side bars
WSS signal 4:3 screen
4:3 mode "Normal"

Language

Menu Operation: A (page 12)
You can select a language from the Setup menu. Select
from among 13 languages. (Dutch, English, Finnish,
French, German, Greek, Italian, Polish, Portuguese,
Russian, Spanish, Swedish, Turkish)

Supply Voltage

Menu Operation: A (page 12)
Switch on or off the power to the antenna connected
to the antenna input terminal. (See page 4.)

Option menu

MENU [ Option ]
Option

Audio Only

DNR [Off]
Input Select [CVBS]
Colour System [AUTO]
NOTE
• "HDMI Setup" is displayed only when "EXT5" or "EXT6" is
selected from the INPUT SOURCE menu.
Audio Only
Menu Operation: A (page 12)
When listening to music from a music programme, you
can set the TV off and enjoy audio only.
Item
Off: Both screen images and audio are output.
On: Audio is output without screen image.
TV/DTV/AV only
4:3 mode "Panorama"