Before Operation; Setting The Clock - Sharp R-654M Operation Manual With Cookbook

R-654M O/M & C/B 05/04/2001 10:58 Page 7
Website: http://www.sharp.co.uk/support
Plug in the oven.
1. The oven display will flash:
2. Press the STOP/CLEAR key.
3. The display will show:
To set the clock, see below.
When using the oven for the first time:
Heat the oven using GRILL mode without food for
20 minutes. See note on page 9.
There are two setting modes: 12 hour clock and 24 hour clock:
1. To set the 12 hour clock, press the DELAY START/CLOCK SET key once,
will appear in the display.
2. To set the 24 hour clock, press the DELAY START/CLOCK SET key twice,
will appear in the display.
Example:
To set the 24 hour clock to 23:35:
1. Select the 24 hour clock.
x2
4. To enter the minutes press the 10 MIN
key 3 times then press the 1 MIN key 5
times.
x3
NOTES:
• To check the time of day during a cooking process, press DELAY START/CLOCK SET key and the time of day
will remain on the display as long as you keep your finger on the key. This does not affect the cooking process.
• If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not
been set, the display will only show
• If the electrical power supply to your microwave oven is interrupted, the display will intermittently show:
after the power is reinstated. If this occurs during cooking, the programme will be erased. The time of
day will also be erased.
• When you want to reset the time of day, follow the above example again.
1.
2.
3.
2. To enter the hours press the 10
MIN key twice then the 1 MIN
key 3 times.
x2
5. To start the clock press the
DELAY START/CLOCK SET
key once.
x5
when cooking is complete.
7
Help Line: 08705 274277 (office hours)

BEFORE OPERATION

STIR TURN KG•LB GRILL MICRO COOK
x1
STIR TURN KG•LB GRILL MICRO COOK

SETTING THE CLOCK

3. To change from hours to minutes
press the DELAY START/
CLOCK SET key once.
x3
Check the display:
STIR TURN
x1
x1
x2
x1
KG•LB GRILL MICRO COOK