Microwaving; Microwave Power Levels - Sharp R-654M Operation Manual With Cookbook

R-654M O/M & C/B 05/04/2001 10:58 Page 6
Website: http://www.sharp.co.uk/support

MICROWAVING

Introduction:
Water, sugar and fat in food absorb microwaves which
causes them to vibrate. This creates heat by friction, in
the same way your hands get warm when you rub
them together.
Outer areas of food are heated by microwave energy,
and remaining portions by conduction. It is, therefore,
important to turn, rearrange or stir food to ensure
even heating. Where recommended allow food to
stand. This is not optional but necessary to ensure

MICROWAVE POWER LEVELS

Your oven has 5 power levels. To choose the power
level for cooking, follow the advice given in the
recipe section.
recommendations apply:
100P - (HIGH output = 800W) used for fast
cooking or reheating e.g. for casseroles, hot
beverages, vegetables etc.
70P - (MEDIUM HIGH output = 560W) used for
longer cooking of dense foods such as roast joints,
meat loaf and plated meals, also for sensitive dishes
such as cheese sauce and sponge cakes. At this
reduced setting, the sauce will not boil over and food
will cook evenly without over cooking at the sides.
To change the power level for cooking, enter the
required time and then press the MICROWAVE
POWER LEVEL key.
For example:
100P (HIGH)
x1
70P (MED.HIGH)
x2
50P (MEDIUM)
x3
30P (MED.LOW)
x4
10P (LOW)
x5
Generally the following
STIR TURN KG•LB GRILL MICRO COOK
STIR TURN KG•LB GRILL MICRO COOK
STIR TURN KG•LB GRILL MICRO COOK
STIR TURN KG•LB GRILL MICRO COOK
STIR TURN KG•LB GRILL MICRO COOK
Help Line: 08705 274277 (office hours)
thorough cooking and is particularly important for
dense food, such as joints of meat.
Microwaves pass through non-metallic dishes and
utensils and heat the food inside the dishes.
Microwaves are reflected by metal. The oven is lined
with metal and has a fine metallic mesh in the door to
prevent microwave leakage. Metallic dishes are not
suitable for microwaving. Only use utensils that are
suitable for microwave ovens.
(See suitable cookware, pages 20-21).
50P - (MEDIUM output = 400W) for dense foods
which require a long cooking time when cooked
conventionally, eg. beef dishes, it is advisable to use
this power setting to ensure the meat will be tender.
30P - (MEDIUM LOW output = 240W Defrost
setting) to defrost, select this power setting, to ensure
that the dish defrosts evenly. This setting is also ideal
for simmering rice, pasta, dumplings and cooking
egg custard.
10P - (LOW output = 80W) For gentle defrosting,
eg. cream gateaux or pastry.
P = PERCENTAGE
Power level: The microwave power level is varied
by the microwave energy switching on and off.
When using power levels other than 100P you will
be able to hear the microwave energy pulsing on
and off as the food cooks or defrosts.
IMPORTANT: The microwave power level will default
to 100P unless you press the MICROWAVE POWER
LEVEL key to the desired setting.
TO CHECK THE POWER LEVEL:
To check the microwave power level during cooking,
press the MICROWAVE POWER LEVEL key. As long
as your finger is pressing the MICROWAVE POWER
LEVEL key the power level will be displayed. The oven
continues to count down although the display will show
the power level.
6