Choice Of Electrical Connection; Preparing Cabinet For Fitting Of Oven - Tricity Bendix TDB950 User Manual

Choice of electrical
connection
•
The appliance should be operated
using at least 6mm
PVC insulated multicore cable. Please
choose from the most appropriate after
reading the different methods:-
By connecting the appliance to a cooker
point (having a double pole isolating
switch with at least 3mm contact
separation in all poles) and protected
with a fuse or miniature circuit breaker
at your mains fuse box.
b) If you wish to connect an oven and a
hob to a cooker point you can. Oven
and hob units should be separately
connected to a cooker point. See Fig.
2.
twin core and earth
2
Fig. 2
Note: It is good practice to :
•
Fit an Earth Leakage Circuit Breaker to
your house wiring.
•
Wire your appliance to the latest IEE
regulations.
Preparing cabinet for fitting
of oven
•
Make sure that the cabinet is the
correct size for the appliance to be fitted
(Ref. Fig. 3).
•
If the size is between 565-570mm, then
the cabinet should be modified so that
at the screw
recommended dimension of at least
560-565mm is
modification should ideally be localised
to ensure that after screw fitment the
oven is securely fixed into position.
•
The cabinet must be stable and level by
firmly securing it to the wall or floor. If
necessary, make arrangements to
ensure the shelf upon which the oven
will rest is level.
•
When the appliance is installed ensure
a minimum gap of 2mm is maintained
between the trim on the bottom edge of
the appliance, and any corresponding
door / panel underneath.
fixing points the
maintained. The
37