Table of Contents
Advertisement
29
• Install the battery into the battery compartment (see step
2, page 19 in the Battery Installation section).
• Plug the battery harness and the motor harness together.
Push firmly to snap the connectors together.
30
Power Button
• Test to be sure you have assembled the power button
harness correctly.
• Press the power button. The vehicle should move forward.
• If the vehicle does not move, you have probably assem-
bled the power button harness incorrectly. Please re-read
assembly steps 1-7 and 24-25.
Assembly
31
Handgrip
• Fit a handgrip on the end of each handlebar.
Hint: If it is difficult to slide the handgrips onto the handle-
bars, moisten the inside of the handgrips with water.
32
Lock Fastener
LOCKED
• Fit the tab on the seat into the slot in the gas tank.
• Using a slotted screwdriver, turn the lock fastener
to the locked position
IMPORTANT! Remember to keep the lock fastener
16
locked at all times to prevent children from accessing
the vehicle battery.
Handlebars
Seat
Gas Tank
Tab
Lock Fastener
UNLOCKED
.
Handgrip
1
/
turn
4
Advertisement
Table of Contents
