Speaker Connections - Panasonic CQ-FX721N Operating Instructions Manual

Speaker Connections

Caution: Please follow the instructions given below. Failure to do so will cause damage to the unit and speakers.
<Right>
(White)
+ +
L
-
-
(White
w/black stripe)
(Gray)
+
+
R
-
-
(Gray
w/black stripe)
<Wrong>
+
+
L
-
-
Chassis
+
+
R
-
-
Chassis
¡Never connect the speaker cord to
the body of the car.
¡Use ungrounded speaker only.
¡The maximum speaker output should be 50 W or more. (If used with
the optional power amplifier, the speaker output should be higher than
the maximum amplifier output.)
¡The speaker impedance should be 4 - 8 Ω.
¡This unit uses the BTCL circuit, so each speaker should be connected
separately using parallel vinyl insulated cords.
¡The speaker cords and the power amplifier unit should be kept away
(about 30 cm apart) from the antenna and antenna extension cord.
+
+
L
-
-
+
+
R
-
-
¡Do not use a 3-wire type speaker
system having a common earth
lead.
+
+
L
-
-
+
+
R
-
-
¡Do not connect more than one
speaker to one set of speaker
leads.
CQ-FX721N
E
N
G
L
I
S
H
32
+
-
+
-
35