Panasonic CQ-FX721N Operating Instructions Manual page 14

Radio Data System (RDS)
E
N
G
L
I
S
H
11
PTY Preset Call
Program types are stored in memory under preset memory number 1 to 6 as shown in the table on the next
page. To select the desired program type, press [P·SET}] or [P·SET{] / [}] or [{].
[BAND]
(Preset PTY search)
PTY Preset Change
q Select the desired program type by using PTY Selection or
PTY Preset Call.
w Press and hold [P·SET}] or [P·SET{] / [}] or [{]
for more than 2 seconds to select the preset memory
mode.
e Press [P·SET}] or [P·SET{] / [}] or [{] to select
the desired preset number.
r Press and hold [P·SET}] or [P·SET{] / [}] or [{]
for more than 2 seconds to memorize.
Preset Number
* On the remote control, press and hold the preset
buttons for more than 2 seconds.
14
Program Type (PTY) Reception
RE MO TE
CH ·C
1 2
PT Y
Program Type
CQ-FX721N
(continued)
[P·SET{] [P·SET}] (PTY preset call/change)
Preset PTY Search
q Select a program type by PTY preset call.
w Press [BAND] to tune in the desired program
type station.
Note : When there is no corresponding program
type, "NONE" is displayed for 2 seconds.
[}]
(PTY preset call
/change)
Preset buttons
[BAND]
(Preset PTY search)
[{]
(PTY preset call/change)