Fast Forward And Rewind - Panasonic CQ-FX721N Operating Instructions Manual

Cassette Player
E
N
G
L
I
S
H
RE MO TE
CH ·C
1 2
13
PT Y
To Stop and Eject the cassette
Press [u].
[BAND] (PRG/Set)
RE MO TE
PT Y
[MENU]
[P·SET}] [P·SET{] (Select)
[SOURCE]
[}]
(Metal Tape)
(Dolby B NR)
(Select)
[BAND]
(PRG/Set)
[]]
(Rewind)
Direct play setting from remote control when the menu is not dis-
played
Press [6] (Repeat) on the remote control. Press again to cancel.
Cautions:
¡To avoid damaging the front panel, do not push it down or place objects on it while it is open.
¡ Do not pinch your finger or hand in the front panel. Do not insert foreign matter into the cassette slot.
16
[DISP] (Return)
CH ·C
1 2
[1] [2]
[6] (Repeat)
CQ-FX721N
Open the Front Panel
1
Press [OPEN] on the front panel.
Cassette Insert
2
Playback starts. Close the front panel.
Notes :
¡Do not insert a cassette when
lights.
¡Loading a cassette when the power is off allows
Exposed end
the power to be turned on. (When ACC
(Open end)
Selection is set to ON
¡Ejecting the cassette when the unit is in the cas-
sette mode allows the mode returns to the pre-
vious one.
Metal tape, Dolby B, Blank
skip and Repeat Indicator
When a cassette is in the player
[SOURCE]
Press [SOURCE] to select the cassette player
mode and playback starts.
Playing Side Change
Press [BAND] to reverse.

Fast forward and Rewind

[TRACK2] / [[] : Fast forward
[SEL] (Menu)
[TRACK1] / []] : Rewind
Press [BAND] to resume the tape play.
[[]
(Fast Forward)
Dolby Noise Reduction
¡Press [P·SET}] / [}] to set the Dolby B
[DISP]
(Return)
NR mode.
¡Press [P·SET}] / [}] again to cancel.
[{]
Metal Tape Mode
(TPS)
(Blank Skip)
¡Press and hold [P·SET}] / [}] for more
(Select)
than 2 seconds when playing metal or chromi-
um dioxide (CrO
¡Press and hold [P·SET}] / [}] again to
cancel.
a
page 24)
Cassette Player Mode Display
Play side
When a Cassette is inside
(Blinks during Cassette play)
) tapes.
2
indicator