Connections (Advanced Connection); Connecting The Remote Control Connectors; Remotely Connecting Marantz Devices - Marantz SR5007 Owner's Manual

Connections (Advanced connection)

Connecting the REMOTE CONTROL connectors

Performing operations on this unit and external devices
• You can connect an IR receiver to this unit to perform operations on this unit and external devices with
the supplied remote control unit.
• To do this, disable the remote control signal receiving function
IR receiver
RC OUT
NOTE
When not connecting an IR receiver, make sure to enable the remote control signal receiving function.
When the function is disabled, you can not perform operations with the remote control unit.
DVD

Remotely connecting marantz devices

• When you are using a marantz device other than this unit that supports remote connection, an IR receiver
(vpage 96 "Remote lock function"). • You can transmit remote control signals just by connecting the device to the REMOTE CONTROL IN/
• Set the remote control switch located on the rear panel of the connected audio component to
• If a marantz power amplifier (excluding certain models is connected to any of these connectors, the
89
is not necessary.
OUT connector with a monaural cable.
"EXTERNAL" or "EXT." to use this feature.
power of the power amplifier switches to on/standby in conjunction with the
the this unit.
REMOTE
CONTROL
IN OUT
CD recorder
EXTERNAL INTERNAL
X ON/STANDBY
REMOTE REMOTE
CONTROL CONTROL
IN OUT IN OUT
DVD player CD player
EXTERNAL INTERNAL EXTERNAL INTERNAL
button of