Subwoofer Level - Marantz SR5007 Owner's Manual

Setting items
Center Width 0 – 7 (3)
Distributes the dialogue
The smaller the value, the more dialogue is concentrated on the center
output from the center
channel. The larger the value, the more dialogue is distributed to front
channel to left and right
left and right channels, and the more the sound image widens in the
channels and widens the
front.
sound image in the front.
You can set this when the
sound mode is Dolby PLgx
in the "Music" mode.
Height Gain Low : Reduce the front height channel volume.
Control the front height Normal : Front height channel sound is output with standard sound
channel volume. volume.
High : Increase the front height channel volume.
NOTE
"Height Gain" is displayed for the following settings.
• When "Assign Mode" (vpage 121) is set to "Front Height".
• When the "Speaker Config." – "Front Height" setting (vpage 122) is
set other than to "None".
• When sound mode is "PLgz" or the PLgz decoder is used.
Yes : Reset to the defaults.
Set Defaults
The "Surround Parameter" No : Do not reset to the defaults.
settings are returned to the
When you select "Set Defaults" and press
default settings.
ENTER
, the "Reset to the default values?"
prompt is displayed. Select either "Yes" or
"No", and press
Tone
Adjust the tonal quality of the sound.
Setting items
Tone Control On : Allow tone adjustment (bass, treble).
Set the tone control function Off : Playback without tone adjustment.
to "On" and "Off".
"Tone Control" can be set when "Dynamic EQ" (vpage 109) is set
to "Off".
NOTE
• "Tone Control" settings are not reflected to ZONE2.
• The tone cannot be adjusted in the "DIRECT" or "PURE DIRECT" mode.
Bass –6dB – +6dB (0dB)
Adjust bass.
"Bass" can be set when the menu "Tone Control" setting is "On".
Treble –6dB – +6dB (0dB)
Adjust treble.
"Treble" can be set when the menu "Tone Control" setting is "On".
DVD
Setting details
ENTER
.
Default settings are underlined.
Setting details
Dialogue Level
Sets the output level to clarify the dialogue output from the center channel.
Setting items
Dialogue –12dB – +12dB (0dB)

Subwoofer Level

Sets the subwoofer on/off and its output level.
Setting items
Subwoofer On : The subwoofer is used.
Turn subwoofer output on Off : The subwoofer is not used.
and off.
NOTE
This can be set when the sound mode is "DIRECT" or "PURE DIRECT"
(vpage
"LFE+Main".
Subwoofer Level –12dB – +12dB (0dB)
Set the subwoofer output
level.
107
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
71) and the "Subwoofer Mode" (vpage
Audio
122) is