Panasonic CQ-C5303N Operating Instructions Manual page 40

E
Troubleshooting
N
G
L
I
S
■
RDS
H
39 1
Problem
PS does not appear
even if an RDS station
is tuned in to. ("NO
PS" appears.)
Receiving programmes
differs from PTY that
was already set up.
"NONE" appears when
selecting PTY.
The clock time (CT)
does not indicate
accurately.
An AF station cannot
be received even if AF
indicator lights.
■
CD
Problem
No playback or disc
ejected
Sound skipping or
noise
Sound skipping due to
vibration
Disc unejectable
40
CQ-C5303N
(continued)
Possible cause
A PS code cannot be received for the reason of bad receiving conditions, etc.
aA PS code appears if it is received. Wait for a while until conditions
change.
When the station changed between programmes, the unit could not receive
the PTY code.
aAn appropriate programme is searched for and tuned into after receiv-
ing a corresponding PTY code. Therefore, wait for a while.
Any specified PTY programmes cannot be received. There is no desired pro-
gramme being broadcast in your area.
aSelect another PTY, or wait until a desired programme starts.
The unit received a station broadcasting time that is not appropriate for you,
or the unit is receiving a station that does not broadcast time.
aReceive a station broadcasting time that is appropriate for your area, or
adjust CT manually.
There is little difference in receiving conditions between the current station
and AF stations. Update of AF list ended in failure.
aWait until the AF list is successfully updated. For unstable reception,
tune in to a stable station by the hand.
Possible cause
The disc is inserted upside down.
aInsert a disc correctly.
There is a flaw or foreign objects on the disc.
aRemove the foreign objects, or use a flawless disc.
There is a flaw or foreign objects on the disc.
aRemove the foreign objects, or use a flawless disc.
The unit is not sufficiently secured.
aSecure the unit to the console box.
The unit is tilted at over 30˚ in the front-to-end direction.
aMake the angle 30˚ or less.
Something such as a peeled label obstructs the disc coming out.
aPress and hold the [ u ] (OPEN) for more than 2 seconds when the face
plate is open (disc forced ejection). In case that the disc forced ejection
does not work, consult your dealer.
The microcontroller in the unit operates abnormally due to noise or other fac-
tors.
aUnplug the power cord and plug it again. In case the unit is still out of
order, consult your dealer.
Possible solution
a
Possible solution
a