Panasonic CQ-C5303N Operating Instructions Manual page 29

Regular mode
FADER
Note:
¡ The sequence and contents of setting items may depend on the conditions of devices to be connected. For further
information, refer to the System Upgrade Guidebook or the instruction manuals for the devices to be connected.
¡ To return to the regular mode, press [D] (DISP).
¡ If no operation takes place for more than 5 seconds (10 seconds in the SQ adjustment) in audio setting, the dis-
play returns to the regular mode.
¡ Please refer to page 9 for calling up a preset SQ.
w q
Note:
¡ You cannot save
any SQ presetting
value in [1] button.
¡ Any SQ adjust-
ments will not
change the call up
screen names such
as ROCK and JAZZ.
w q
w q
VOLUME
BALANCE SQ SET
q
Press [ [ ] or [ ] ] to select a frequency
band (Low, Mid, High).
[ [ ]: Higher frequency band
[ ] ]: Lower frequency band
Turn [VOLUME] to select a frequency.
q: Higher frequency
w: Lower frequency
w
Press [ } ] or [ { ] to adjust the level.
[}]: Up
[{]: Down
e
Press and hold one of the preset buttons
from [2] to [6] for more than 2 seconds.
¡The adjusted SQ is preset in the num-
ber of the selected button, and return
to the regular mode resumes.
¡When you suspend the SQ preset adjustment, each level remains your recent
adjustment until a new SQ presetting operation is performed or you call up
the SQ preset.
Turn [VOLUME].
q : Right enhanced
w : Left enhanced
Turn [VOLUME].
q : Front enhanced
w : Rear enhanced
BASS TREBLE
SRS TRUBASS
Frequency
The selected frequency band
blinks.
Level
CQ-C5303N
E
N
G
L
I
S
H
28 1
29