Sq Adjustment; Balance/Fader - Panasonic CQ-C5303N Operating Instructions Manual

E
Audio Settings
N
G
L
I
S
H
27
[MUTE] (SQ)
(Sound Quality)

SQ Adjustment

You can adjust the characteristics of the currently selected
sound type (SQ).
It is also possible to preset up to 5 different adjusted SQs.
Tone/SQ adjustable range : – 12 dB to + 12 dB (by 2 dB)
SQ Low/Bass
SQ Mid
SQ High/Treble
¡ The bass/treble control level of each frequency is fixed to the
frequency that has been selected for SQ.
FTo return an adjusted SQ to the default setting
q Press and hold [MUTE] (SQ) for more than 1 second, and
select the SQ which is to be returned to the default setting.
w Press and hold [BAND] for more than 2 seconds.

Balance/Fader

You can adjust the sound level among the right, left, front and
rear speakers.
Default: BAL (balance) CNT (centre)
FAD (fader) CNT (centre)
Setting range: 15 levels each and CNT (centre)
28
CQ-C5303N
(continued)
Preset Buttons [2] to [6]
(a Page 9)
: ± 12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)
: ± 12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)
: ± 12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)
Turn [VOLUME]. (Press [VOL
] on the remote control unit.)
[VOL {
[D] (DISP) (Return to the regular mode)
] or
}
Press [VOLUME]
(PUSH SEL: select).
(Press [SEL] on the
remote control unit.)
[ [ ] / [ ] ]
[{] / [}]
[BAND]
Press [VOLUME] (PUSH SEL) .
Press [VOLUME] (PUSH SEL) .
Press [VOLUME] (PUSH SEL) .
Regular mode