Smeg Oven General Instructions Manual page 21

Instructions for the user
7.8 Secondary menu (pyrolytic models)
The secondary menu appears on first use, after a power failure or by holding
PT1 down for 3 seconds with the oven set to OFF (see "7.4 Operating modes
(pyrolytic models)").
The secondary menu enables the user to:
Set the time shown on the display (DSP1).
P1: OFF / ON
1
function, after 2 minutes of operation without any actions by the user, locks
all the functions and knobs; it is identified by the appearance of
DSP1. To temporarily deactivate locking and modify a cooking programme
or select a different function, keep PT1 pressed down until
from DSP1. At this point you can make the desired changes, and 2 minutes
after the last setting, the lock will be reactivated. To permanently deactivate
the lock, you have to enter the secondary menu and deactivate it as
described in this paragraph.
P2: OFF / ON
2
function disables all the heating elements so that only the control panel
works (to use the oven normally, set
P3: OFF / ON
3
consumption of 2300 W.
When the child safety lock is activated (
displayed on DSP1 for 2 seconds. An action on PT2 also activates the "bLOC"
alarm until the function originally selected is restored.
Activate or deactivate the child safety lock (
Activate or deactivate the Show Room function; this
Activate or deactivate the function that allows a maximum
P2:OFF
).
P1:ON
), if a knob is moved , "bLOC" is
); this
on
disappears
65