Smeg Oven General Instructions Manual page 19

Instructions for the user
7.7.3 Automatic cooking
Automatic cooking is the function which allows a cooking operation to be
started at a set time and then ended after a specific length of time set by the
user.
Select a cooking function, set the desired cooking temperature or leave the
preset temperature (see "7.6 Selecting functions (pyrolytic models)") and press
PT1 twice. The display will show and (flashing).
Turn PT1 to the right or left to set the minutes of cooking (from 00:01 to 23:59).
For reasons of safety, when setting automatic cooking the user must first
program a cooking duration and then set the cooking start time. It is not
possible to set the cooking start time only, without setting the cooking duration.
After setting the duration, press PT1 once.
and the current time will appear on the display.
Turning PT1 to the right increases the time, allowing the cooking start time to
be set.
A few seconds after the desired duration is set, and will stop flashing
and remain constantly on, and the oven will start to wait for the starting time set.
At the end, the word STOP will appear on DSP1, cooking will stop and a buzzer
will sound; press PT1 once to deactivate it.
If you wish to continue cooking beyond the set time, press PT1 again. The oven
will restart normal operation with the cooking settings selected previously.
To switch the oven off completely, PT2 must be turned to 0.
63