Multimediacard Installation; Formatting A Multimediacard - Aiwa MM-FX500 Operating Instructions Manual

PREPARATIONS

MultiMediaCard installation

Before inserting
MultiMediaCard, be sure to turn off your
MM-FX500 and disconnect it from the 25-
to-15 pin parallel cable.
1 Insert the MultiMediaCard into the slot
in the correct direction.
(Upper) SLOT 2
(Lower) SLOT 1
If this is the first time using the
MultiMediaCard, format it with the unit or
the Manager software installed on your
PC (see page 19).
To remove the MultiMediaCard, press
the eject button and pull it out gently.
Notes
• Insert the MultiMediaCard completely into
the slot. If not, MM-FX500 Manager will
be unable to recognize the files on the
card.
• Do not insert anything else into the memory
card slot.
or removing a
O P
E N
Eject buttons

Formatting a MultiMediaCard

Before using a MultiMediaCard for the first
time it must be formatted.
1 Insert the MultiMediaCard into an
empty slot.
2 Press the MENU button repeatedly
until FORMAT is displayed.
3 Press the la button to format (press
s to cancel).
The confirmation message will be
displayed.
WARNING! FORMAT Y/N
4 Press the la button to format (press
s twice to cancel).
Formatting will begin.
Note
• Formatting permanently erases all files
from a MultiMediaCard.
9
ENGLISH