Smeg Built-in oven Instructions For The User page 18

Instructions for the user
Cooking start: as well as setting a cooking duration, the cooking start
time can also be set (with a maximum delay of 12 hours in relation to the
current time). To set the cooking start/end time, proceed as follows:
Set the cooking duration as described in the previous point.
-
Within 5 seconds of last pressing key
to set the cooking end time. Symbol
together with the current time, with internal segments illuminated to
show the end of cooking time. Use keys
cooking end time.
-
5 seconds after the last key is pressed, the display will show the
current time and the cooking start and end times, which will be
represented by the illuminated inside segments. The display
segments will be constantly illuminated as long as the current time is
not the same as the cooking start time; as soon as the current time
reaches the set starting time, all the inside segments will start to
flash, indicating that the oven has started cooking.
-
At the end of the cooking time the timer will switch the oven heating
elements off, the beeps will start to sound and the numbers on the
dial will flash.
-
To delete the entire set program, hold down the central key
seconds; if cooking has already started, the oven will have to be
switched off manually.
-
Here we can see a programming example: the
current time is 7:06 and cooking is programmed
to start at 8.00 and end at 9.00.
-
At 8 o'clock the inside segments between 8 and
9 will start to flash, while the hours hand will
remain still.
Warning: for the oven to start cooking operations after the
programming procedures just described, the thermostat and
functions switch knob must be correctly set on the desired
temperature and function.
5.2.4 Display brightness reduction
To reduce the energy consumption in stand-by, key
reduce the display brightness. To restore the normal brightness, press
again.
20
or , press key
will flash on the display
and to set the
can be pressed to
again
for 2
1