SMART FORTWO CABRIO Operating Instructions Manual page 86

Telephone console*
Remove the cover cap on the centre tun
nel console.
Release the Torx screw beneath it us
ing a suitable screwdriver.
Pull up and remove the gearshift lever
knob (on vehicles with softouch*, take
care not to press the automatic button
when pulling it off!).
> The centre tunnel console can be
dismantled.
84 Communication
The centre tunnel console is fastened to
the vehicle by means of two detent hooks
at the front.
Bend open the console at the round in
serts.
Lift the centre tunnel console and re
move it.
Place the centre tunnel console on a
flat working surface.
Push the telephone console beneath the
centre tunnel console until the under
sides are parallel and the rounded sec
tion at the rear edge of the telephone
console is parallel with the insert in
the centre tunnel console.
Insert the enclosed screws through the
designated holes, and screw them di
rectly into the plastic of the centre
tunnel console.