SMART FORTWO CABRIO Operating Instructions Manual page 61

High beam lights
The high beam lights can only be
switched on if
the ignition is turned over.
the rotary control is turned to at least
stage 2 (low beam lights).
Switching on the high beam lights
Press the lever away from the steering
wheel (1).
> The lever engages.
Switching off the high beam lights
Pull the lever towards the steering
wheel (2).
> The lever is back in its default posi
tion.
Coming home function*
The coming home function allows you to
switch on your car's lights and the inte
rior lighting if the vehicle is parked in
a dark area or you are approaching it.
12 seconds is the time the lights on your
vehicle will stay on to help you find your
way.
When leaving the car
Remove the ignition key.
Briefly press the locking button on the
remote control twice in succession.
> The car is locked.
> The driving lights are switched on
automatically and go out again after
12 seconds.
Upon returning to the car
Briefly press the unlocking button on
the remote control twice in succession.
> The car is unlocked.
> The car's exterior and interior
lights comes on and then go off again
after 12 seconds.
Lights
Light conditions 59