SMART FORTWO CABRIO Operating Instructions Manual page 83

In right hand drive model
Guide the cassette box up against the
fixing holes on the vertical console.
The housing of the cassette box must
rest against the vertical console.
Screw the housing to the left hand
fixing hole with the aid of a coin.
Fold the cassette trays open and secure
the cassette box through the hole in the
rear wall with the second screw.
Check that the housing is located se
curely and fit the cover cap over the
left hand screw.
>Note!
Removal is done in the reverse order.
Cassette box*
Installation in conjunction with the
drinks holder or the CD box
If so, note that the ashtray always must
remain installed in the uppermost posi
tion and the drinks holder always in
stalled in the lowest position.
Always install the items in the vertical
console from top to bottom.
The individual elements are linked to
gether by guides.
Push the top side of the element to be
installed as far as it will go along the
guide on the underside of the element
already installed above it.
Before screwing the individual ele
ments tight, check that they are prop
erly interconnected and are located
flush one above the other.
Communication 81