SMART FORTWO CABRIO Operating Instructions Manual page 198

Divider* between the luggage and passenger compartments (cabrio)
Place the belts' turnbuckles from the
rear over the roll bar's covering.
Turn the catch (A) to the horizontal po
sition.
Feed the lower belts through the turn
buckles.
Now insert the hooks into the eyelets
bolted to the floor.
Fasten the divider between the luggage
and passenger compartments by pulling
uniformly on the belts.
196 Loading up
Removing the divider
To relieve the tension on the belt, sim
ply turn the belt buckles until hori
zontal.
Slide the belts out.
> The divider between the luggage and
passenger compartments can now be
unhooked and removed.
>Note!
Do not use the divider if damaged.
Take care not to damage the divider
between the luggage and passenger
compartments by pointed objects or
sharp edges.
Check the divider between the luggage
and passenger compartments for signs
of damage each time it is used.
The luggage compartment should be
loaded in the following manner:
Heavy objects at the bottom
Light items on top
When removed, store the divider rolled
up in a dry, suitable location without
placing anything on top of it.
Observe the loading guidelines on
page 199.