Table of Contents
Advertisement
ASSEMBLY AND OPERATING INSTRUCTIONS (continued)
Arbor Nut (40)
Inner Flange (43)
4.
With the Bevel Table (3) still open, wipe out the Tray (46), and then fill it with cold
water, up to just below the overflow hole. The Tray (46) has 2 Drains that must
always be clear of dirt or debris. Check that both the Drain and the Additional
Safety Overflow Drain are unclogged prior to operation. See FIGURE 4 below.
5.
Swing back the support Arm and adjust the Bevel Table (3) to its down position.
SKU 92658
For technical questions, please call 1-800-444-3353.
FIGURE 3
FIGURE 4
Additional Safety
Overflow Drain
Drain
Blade (42)
Tray (46)
Outer Flange (41)
Blade (42)
Page 14
Hide quick links:
Advertisement
Table of Contents
