Charging The Batteries - Gigaset 3015 Classic Operating Instructions Manual

Gigaset 3015 Classic, ÜBasis, A31008-G3015-B001-1-19

Charging the batteries

The batteries supplied are not charged.
To charge the batteries, insert the mobile unit in the base station or Gigaset
3000L charging unit (accessory) – you will hear the confirmation beep. The
charging status icon flashes on the mobile unit display to indicate that a charg-
ing operation is in progress:
Approved batteries:
Nickel-cadmium (NiCd)
Sanyo N-3U (700 mAh)
GP GP60AAKC (600 mAh)
Varta 751RS (700 mAh)
Mobile Power 700 (700 mAh)
Panasonic 60 DT (600 mAh)
Mobile unit operating times/charging times:
Capacity
Power consumption:
– In standby mode (without charging) approx. 2W.
– In standby mode while charging approx. 5W.
Batteries empty
1
Batteries / charged
3
– We recommend initially charging the batteries for at least 16 hours
without interruption – irrespective of the charging status icon.
– Once the first charging operation is complete, you can replace the
mobile unit in the base station after every call. Charging is controlled
electronically. This ensures optimum charging and prolongs battery
life.
– The batteries heat up during charging; this is normal and entails no
risk.
– The battery charging status is only correctly displayed after uninter-
rupted charging/discharging. You should therefore avoid opening the
battery compartment unnecessarily.
Stand-by time
(mAh) (hours)
700 up to 100
1100 up to 160
1500 up to 220
VORBEREI.FM
Preparing the telephone
2
Batteries / charged
3
Batteries full
Nickel-metal-hydride (NiMH)
Sanyo H-3 U (1500 mAh)
GP GP130 AA HC (1300 mAh)
GP GP150 AA HC (1500 mAh)
Varta VH 1101 or Phone Power(1000 mAh)
Panasonic HHR-110 AA (1100 mAh)
Friwo NiMH (1400 mAh)
Toshiba TH-1200 AARE (1200 mAh)
Talk time
(hours)
over 10
over 15
over 20
20.12.99
Charging time
(hours)
approx. 5
approx. 9
approx. 12
7