Table of Contents
Advertisement
8. Programmable Features
8.3 Fax features (KX-MB1520/KX-MB1530 only)
Feature/Code
Changing the TEL/FAX
delayed ring count
MBNM2NM1NM2N
Erasing all items stored for
the phonebook
MBNM2NM8NM9N
Printing a sending report
MBNM4NM0NM1N
Setting the journal report to
print automatically
MBNM4NM0NM2N
Changing the receiving mode
in the manual answer setting
MBNM4NM0NM4N
Sending documents
overseas
MBNM4NM1NM1N
56
Selection
If you use an extension telephone in TEL/FAX mode, select the desired number
of times the extension telephone rings before the unit answers the call.
KX-MB1520EX/KX-MB1530EX:
M2N "2" (default)
M3N "3"
M4N "4"
KX-MB1520FX/KX-MB1530FX:
M1N "1"
M2N "2" (default)
M3N "3"
M4N "4"
M5N "5"
M6N "6"
M7N "7"
M8N "8"
M9N "9"
Note:
R See page 44 for details.
M0N "NO" (default)
M1N "YES"
R Disconnect the telephone line cord and USB cable before activating this
feature.
To erase all items:
1. MMenuN A MBNM2NM8NM9N
2. Press M1N to select "YES". A MSetN
3. Press M1N to select "YES". A MSetN A MMenuN
M0N "OFF": Sending reports will not be printed.
M1N "ON": A sending report will be printed after every fax transmission.
M2N "ERROR" (default): A sending report will be printed only when fax
transmission fails.
M0N "OFF": The unit will not print a journal report, but will keep a record of the
last 30 fax transmissions and receptions.
M1N "ON" (default): The unit will print a journal report automatically after every
30 new fax transmissions and receptions (page 39).
M1N "TEL" (default): Telephone mode (page 43)
M2N "TEL/FAX": Telephone/Fax mode (page 44)
If you cannot send a fax overseas even if the number is correct and the line is
connected, activate this feature before sending the fax.
This feature improves the reliability by reducing the transmission speed.
M0N "OFF": Deactivates this feature.
M1N "NEXT FAX": This setting is effective only for the next attempted fax
transmission. After transmission, the unit will return to the previous setting.
M2N "ERROR" (default): When the previous fax transmission fails and you wish
to re-send the document.
Note:
R Calling charges may be higher than usual.
Advertisement
Table of Contents
