Inspection, Maintenance, And Cleaning; Parts List; Please Read The Following Carefully - Chicago Electric 93431 Assembly And Operating Instructions Manual

INSPECTION, MAINTENANCE, AND CLEANING

1. WARNING! Make sure the Power Switch (15) of the Sander is in its "OFF"
position and that the tool is unplugged from its electrical outlet before performing
any inspection, maintenance, or cleaning procedures.
2. BEFORE EACH USE, inspect the general condition of the Sander. Check for loose
screws, misalignment or binding of moving parts, cracked or broken parts, damaged
electrical wiring, and any other condition that may affect its safe operation. If
abnormal noise or vibration occurs, have the problem corrected before further use.
Do not use damaged equipment.
3. Wipe the unit down after each use with a dry, lint free cloth.
2. Make sure the vents on the top are clear of dust and debris.
3. Periodically, have a qualified service technician clean or replace the Carbon Brushes
(9).
Part # Description
1 Top Enclosure
2 Bottom Enclosure
3 Stator
4 Rotor
5 Right Label
6 Left Label
7 Bearing 6x19x6
8 Brush Holder
9 Carbon Brush
10 Cord Anchor
11 Screw ST3.5x16
12 Cord Guard
13 Power Cord and Plug
14 Switch Cover
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL
AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO
MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY
PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED
AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND
LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT
PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS
THERETO.
SKU 93431 For technical questions, please call 1-800-444-3353.

PARTS LIST

Qty.
1
1
1
1
1
1
1
2
2
1
2
1
1
1

PLEASE READ THE FOLLOWING CAREFULLY

Part # Description
15 On/Off Switch
16 Bearing 9x26x8
17 Balance Fan
18 Bearing Holder
19 Bearing 15x32x9
20 Damper
21 Gasket
22 Screw M4x12
23 Backing Pad
24 Gasket M4
25 Spring Gasket
26 Screw M4x8
27 Screw 4.2x20
28 Dust Bag
29 Sanding Disc
Qty.
1
1
1
1
1
1
1
1
1
4
4
4
4
1
1
Page 12