Specifications; General Safety Rules; Work Area; Electrical Safety - Chicago Electric 92158 Assembly And Operation Instructions Manual

Motor
Belt Speed
Sanding Area
Pivot Head
Line Cord
Overall Dimensions
Weight
Accessories
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
reAd And understAnd All instructiOns
failure to follow all instructions listed below may result in
Keep your work area clean and well lit. Cluttered benches and dark areas invite
1.
accidents.
do not operate power tools in explosive atmospheres, such as in the presence
2.
of flammable liquids, gases, or dust. Power tools create sparks which may ignite
the dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges,
4.
and refrigerators. There is an increased risk of electric shock if your body is
grounded.
do not expose power tools to rain or wet conditions. Water entering a power tool
5.
will increase the risk of electric shock.
for technical questions, please call 1-800-444-3353.
SKU 92158

specificAtiOns

120 V~, 60 Hz, 600 watts, n
2300 FPM (feet per minute) (single speed);
Gear driven
1/2 (W) x 5 (L) Inches
Adjustable 180°
Two prong polarized, 8 feet, 9 inches long
11 (L) x 4-1/2 (H) x 3 (W) Inches, 18-1/4 (L) with
sanding head
4.8 lb.
5 – Sanding Belts
sAVe this mAnuAl

generAl sAfety rules

wArning!
electric shock, fire, and/or serious injury.
sAVe these instructiOns

work Area

electrical safety

10,000/min
0
230677
reV 09/06
Page 2