Specifications; Setup; Operation - Chicago Electric 94338 Owner's Manual & Safety Instructions

Specifications

Electrical Rating
No Load Speed
Dust Chute
Sanding Pad Dimensions
Setup - Before Use:
Read the ENTIRE IMpORTANT SAFETy INFORMATION
manual including all text under subheadings therein before set up or use of this product.
TO pREVENT SERIOUS INJURy REVENT SERIOUS INJUR FROM A REVENT SERIOUS INJURy
Make sure that the Trigger is in the off Trigger Trigger is in the off
electrical outlet before performing any procedure in this section.
Note: For additional information regarding the parts listed in the For additional information regarding the parts listed in the
following pages, refer to Parts List and Diagram on page 11.
Assembly - Attaching the Dust Bag (29)
1. Connect the Dust Bag to the sander by firmly
pushing it into the dust port in the rear of the sander.
Page 8
120 VAC, 60 Hz, 2 A
12,000 Orbits Per Minute
1
1 / " OD
4
3-5/8" W x 7-3/8" L x 1/4" thick
y y INFORMATION
y y FROM A ccIDENTAL OpERATION:
-position and unplug the tool from its
For technical questions, please call 1-800-444-3353.
section at the beginning of this
2. The Dust Bag (29) will only work if the
sandpaper has holes that line up with the
8 dust collection holes in the Pad (22).
E194601
Item 94338