Setting Time; Réglage De I'heure; Ajuste De La Hora - Alpine TDA-7563 Owner's Manual

Fm/am cassette receiver
Table of Contents

Advertisement

Setting Time

1
Press and hold the CLK (Clock) button
for at least 3 seconds while the time is
displayed. The time indication will begin
to blink (for 5 seconds).
2
Rotate the MODE (Audio Control) knob
to adjust the hours while the time
indication is blinking.
3
When the hours has been adjusted,
press the MODE (Audio Control) knob.
4
Rotate the MODE (Audio Control) knob
to adjust the minutes while the time
indication is blinking. The time is
automatically set and the time indica-
tion stops blinking 5 seconds after
adjusting the minutes.
English
Réglage de l'heure
Appuyez pendant au moins 3 secondes sur
la touche CLK (horloge) quand l'heure est
affichée. L'indication de l'heure se met à
clignoter (pendant 5 secondes).
Tournez le bouton MODE (réglage audio)
pour ajuster les heures quand l'indication de
l'heure clignote.
Quand les heures ont été ajustées, appuyez
sur le bouton MODE (réglage audio).
Tournez le bouton MODE (réglage audio)
pour ajuster les minutes quand l'indication de
l'heure clignote. L'heure est automatiquement
réglée et l'indication de l'heure cesse de
clignoter pour rester allumée 5 secondes
après le réglage des minutes.
Français

Ajuste de la hora

Mantenga presionado el botón CLK (reloj)
durante 3 segundos por lo menos mientras
esté visualizándose la hora. La indicación de
la hora comenzará a parpadear (durante 5
segundos).
Para ajustar la hora, gire el botón MODE
(Control de audio) mientras esté
parpadeando la indicación de la hora.
Cuando haya ajustado la hora, presione el
botón MODE (control de audio).
Para ajustar los minutos, gire el botón MODE
(Control de audio) mientras esté
parpadeando la indicación de la hora. El reloj
se pondrá en marcha automáticamente y 5
segundos después de ajustar los minutos la
indicación de la hora dejará de parpadear
para indicarse continuamente.
Español
23

Advertisement

Table of Contents
loading

Table of Contents