Converting And Playing Back 2D Images As 3D - Panasonic HC-V500 Operating Instructions Manual

Advanced (Playback)
Converting and playing back 2D
images as 3D
You can connect this unit to 3D compatible TV, convert the scene/still picture recorded in 2D
(conventional image) to 3D and play back.
¬ Change the mode to
AVCHD scene, or set to
: [VIDEO SETUP] or [PHOTO SETUP] # [CONV. 2D TO 3D] # [ON]
MENU
[ON]: Convert and play back the images recorded in 2D as 3D images.
[OFF]: Recorded images are played back as it was recorded.
Setting with the Touch Menu
1
Touch .
≥ This is not displayed when playing back the iFrame or
scenes saved as MP4.
2
Play back the scene or the still picture by
touching it.
≥ Highlight Playback cannot be converted to 3D image.
≥ Scenes/still pictures converted to 3D images cannot be saved as 3D images.
∫ Adjusting 3D effect of the 3D image
It is possible to adjust the disparity of the scenes and still pictures playing back in 3D for better view.
1
Play back the scenes or still pictures in 3D.
2
Touch .
≥ Playback disparity adjustment bar is displayed while
displaying in 3D.
3
Touch /
≥ Playback disparity adjustment bar will disappear after approx. 5 seconds without any touch operation.
≥ The setting is cancelled in following cases:
j If you stop playback
j If you turn the unit off
j If you change the mode
≥ Stop the operation when you feel fatigue, discomfort, or otherwise strange while
playing back or adjusting.
98
VQT3W38
and touch the play mode select icon. T
. (l 31)
to adjust settings.
hen, select the
MENU