Converting And Playing Back 2D Images As 3D; Adjusting 3D Effect Of The 3D Image - Panasonic HC-X900M Owner's Manual

Converting and playing back 2D images as 3D

You can connect this unit to 3D compatible TV, convert the scenes and still pictures recorded
in 2D (conventional image) to 3D and play back.
¬ Change the mode to
the AVCHD scene or set to
: [VIDEO SETUP] or [PICT. SETUP] # [CONV. 2D TO 3D] # [ON]
MENU
[ON]: Convert and play back the images recorded in 2D as 3D images. (3D
images are played back as 3D)
[OFF]: Recorded images are played back as it was recorded.
Setting with the Touch Menu
1 Touch .
≥ This is not displayed when playing back the iFrame scenes
or scenes saved in MP4.
2 Play back the scene or the still picture by touching
it.
≥ Setting for the [3D PLAYBACK] is not possible when [CONV. 2D TO 3D] is set to [ON].
≥ [CONV. 2D TO 3D] setting takes priority regardless of the [3D PLAYBACK] setting.
≥ Highlight Playback cannot be converted to 3D image.
≥ Scenes or still pictures converted to 3D images cannot be saved as 3D images.

Adjusting 3D effect of the 3D image

It is possible to adjust the disparity of the scenes and still pictures playing back in 3D for
better view.
1 Play back scenes or still pictures recorded in 3D.
2 Touch .
≥ Playback disparity adjustment bar is displayed while
displaying in 3D.
3 Touch /
≥ Playback disparity adjustment bar will disappear after
approx. 5 seconds without any touch operation.
≥ The setting is canceled in following cases:
j If you stop playback
j If you turn the unit off
j If you change the mode
≥ Stop the operation when you feel fatigue, discomfort, or otherwise strange while
playing back or adjusting.
120
VQT4C76
and touch the play mode select icon. Then, select
. (l 39)
to adjust settings.
MENU