Dividing A Scene (Avchd) - Panasonic HC-V500 Operating Instructions Manual

7
Touch [ENTER].
≥ Repeat steps 2-7 to continuously delete parts from other scenes.
≥ Deleting of part cannot be performed when there are 99 scenes in a single date.
≥ It may not be possible to delete part of a scene with a short recording time.
≥ The scene will be divided into two scenes when middle part of a scene is deleted.
≥ The relay information is deleted when part of a scene that was relay recorded is deleted,
making it impossible to perform the Relay scene combining. (l 90)

Dividing a scene (AVCHD)

It is possible to divide an AVCHD scene.
Any unwanted parts in the scene can be deleted after dividing.
≥ Change the mode to
AVCHD scene. (l 31)
1
Select the menu.
: [EDIT SCENE] # [DIVIDE] # [SET]
MENU
2
Touch the scene to be divided.
3
Touch to set the dividing point.
≥ It is convenient to use Slow-motion Playback and Frame-by-
frame Playback. (l 72)
≥ Touch [YES] to continue dividing the same scene. To continue
dividing other scenes, touch [NO] and repeat Steps 2-3.
4
Touch [Return] to complete dividing.
≥ Unwanted parts can be deleted. (l 85)
To delete all the divided points
: [EDIT SCENE] # [DIVIDE] # [CANCEL ALL]
MENU
≥ The scenes that were deleted after division cannot be recovered.
≥ You cannot divide a scene if you are playing back a disc with a DVD burner (optional)
connected, or if the number of scenes of a given date would exceed 99 scenes.
≥ It may not be possible to divide scenes with a short recording time.
≥ Data that has been recorded or edited on another device cannot be divided and the divided
points cannot be deleted.
≥ If personal information in the divided scenes is deleted, the personal information is deleted
when the divided scenes are cancelled.
and touch the play mode select icon. Then, select the
0h00m15s 0h00m15s 0h00m15s
87
VQT3W38