Panasonic HC-V500 Operating Instructions Manual page 38

2 Close the LCD monitor.
The status indicator A flashes green and the unit goes into
Quick Start standby mode.
≥ The lens cover does not close.
3 Open the LCD monitor.
The status indicator A lights red and the unit is put
into recording pause.
≥ Quick Start Standby Mode is cancelled if
j about 5 minutes elapsed
j mode is set to
≥ Depending on the recording conditions and menu settings, time for Quick Start may be
longer than 0.6 seconds.
≥ It may take some time for Automatic White Balance to adjust.
≥ In the Quick Start Mode, the zoom magnification becomes approx. 1k.
≥ When it has gone into Quick Start Standby Mode automatically with the [ECONOMY
(BATT)] (l 37)/[ECONOMY (AC)] (l 37), close the LCD monitor once and open it again.
≥ Turn the unit off using the power button.
[ALERT SOUND]
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed
with this sound.
(Volume low)/
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. (l 127)
[SELECT OPERATION
ICONS]
You can change the operation icons to display in the Touch Menu.
Register 3 favourite operation icons.
≥ The default settings are,
Picture Recording Mode, and
Compensation) for Still Picture Recording Mode.
1 Touch [SELECT OPERATION ICONS].
2 Touch the operation icon you would like to change to cancell the setting.
3 Touch the operation icon to be set.
≥ Name of the function is displayed by touching and holding on the operation icon.
≥ To cancel, touch the operation icon again.
4 Touch [ENTER].
≥ For details about the function of each operation icon, refer to page 49.
38
VQT3W38
/
(Volume high)
(Fade), (PRE-REC) and
(Photo light),
/[OFF]
(Self-timer) and
(Video light) for Motion
(Backlight