Chapter 7: Dhcp Server; Dhcp Settings - Tenda W311R User Manual

Chapter 7: DHCP Server

7.1 DHCP Settings

DHCP (Dynamic Host Control Protocol) is to assign an IP
address to the computers on the LAN/private network.
When you enable the DHCP Server, the DHCP Server will
allocate automatically an unused IP address from the IP
address pool to the requesting computer in premise of
activating "Obtain an IP Address Automatically". So
specifying the starting and ending address of the IP
Address pool is needed.
DHCP Server:
enable DHCP server.
IP Address Start/End: Enter the range of IP
address for DHCP server distribution.
Lease Time: The length of the IP address lease.
For example：
If the lease time is an hour, then DHCP server will
reclaim the IP address in each hour.
11N Wireless Broadband Router
Activate the checkbox
48
to