Select SSID : Select the SSID (main SSID or
minor SSID) to configure security setting from the
drop-down menu.
WPA Algorithms:Provides TKIP [Temporal Key
Integrity Protocol] or AES [Advanced Encryption
Standard]. The default is TKIP mode.
Key Renewal Interval : Set the key's renewal
period.
Radius Server:Enter the IP address of the Radius
server.
Radius Server port : Enter the authentication
port of the Radius server. The default is 1812.
Shared Secret : Enter the shared key for
authentication server with 8~63 ASCII characters.
Session Timeout : The authentication interval
period between AP and authentication server. The
default is 3600s.
6.2.6 802.1X
This security mode is used when a RADIUS server is
connected to the device. 802.1x, a kind of Port-based
authentication protocol, is an authentication type and
strategy for users. The port can be either a physic port
or logic port (such as VLAN). For wireless LAN users, a
port is just a channel. The final purpose of 802.11x
authentication is to check if the port can be used. If the
port is authenticated successfully, you can open this
11N Wireless Broadband Router
38