Disassembly Procedure - Panasonic LUMIX DMC-LX2PP Service Manual

8.3.

Disassembly Procedure

No. Item
1 Rear Case Unit
2 LCD Unit
3 Top Operation Unit
4 Front Case Unit
5 Main PCB
6 Lens Unit
7 Battery Case
8 Top Operation PCB
9 Flash Unit
10 Flash PCB
11 Lens Ornament Unit
12 AFMF-Aspect FPC
Fig Removal
Fig. D1 Card
Battery
3 Screws (A)
1 Screw (B)
FP9003(Flex)
FP9004(Flex)
Rear Case Unit
Fig. D1a About the connector
Fig. D2 LCD Unit
Fig. D3 1 Screw (C)
1 Screw (D)
FP9006(Flex)
Capton Tape
Top Operation Unit
Fig. D4 FP9002(Flex)
2 Screws (E)
1 Screw (F)
3 Screws (G)
Front Case Unit
Fig. D5 2 Screws (H)
Jack Door unit
FP9001(Flex)
FP9005(Flex)
P9001(Connector)
1 Locking tab
Main PCB
Fig. D6 1 Locking tab
Lens Unit
Fig. D7 1 Screw (I)
3 Locking tabs
Strap Holder
Battery Case
Fig. D8 4 Screws (J)
Top Operation PCB
Fig. D9 NOTE (When installing)
Fig. D10 1 Screw (K)
1 Locking tab
Nut Plate
Flash Unit
Fig. D11 P8001(Connector)
P8002(Connector)
2 Locking tabs
Flash PCB
Fig. D12 3 Screws (L)
Lens Ornament Unit
Fig. D13 2 Screws (M)
AS Click Spring
AF Click Spring
2 Focus Knobs
2 Focus Sheets
Fig. D14 1 Screw (N)
Lens Frame
2 Screws (O)
AFMF-Aspect FPC
8.3.1. Removal of the Rear Case Unit
21
Fig. D1