Radio And Ac Mains Lead Connections - Panasonic SC-HT892 Operating Instructions Manual

5

Radio and AC mains lead connections

STEP
AM loop antenna
≥ Connect the AC mains lead after all other connections are complete.
≥ Using an outdoor antenna (optional) (➜ page 30).
AM loop antenna
Stand the antenna up on its base.
Place the antenna where reception is best.
Keep loose antenna cable away from other wires
and cables.
AC mains lead
[Saudi[Arabia[and[Kuwait[
BE SURE TO READ THE
CAUTION FOR THE AC
MAINS LEAD ON PAGE 4
BEFORE CONNECTION.
To household mains socket
Conserving power
The main unit consumes a small amount of power, even when it is turned off (approx. 0.9 W). To save power when the unit is not to be used for a long
time, unplug it from the household mains socket.
You will need to reset some memory items after plugging in the main unit.
[Note]
The included AC mains lead is for use with this unit only. Do not use it with other equipment. Also, do not use cords for other equipment with this unit.
12
FM indoor antenna
Click!
While pushing, insert the wire fully.
White
Red
Black
AC mains lead
[Southeast[Asia,]
[the[Middle[East,[South[Africa,[
[Saudi[Arabia[and[Kuwait[
FM indoor antenna
Affix this end of the antenna where
reception is best.
Adhesive tape
Main unit
Loosen the terminal
screw with a Phillips-
head screwdriver.
[Saudi[Arabia[and[Kuwait[
Before connecting
the AC mains lead
Set the voltage.
Change the voltage selector
to the appropriate position
for the area in which this
system is used.
Re-tighten the
terminal screw.