Radio And Ac Mains Lead Connections - Panasonic SC-HT895 Operating Instructions Manual

5

Radio and AC mains lead connections

STEP
AM loop antenna
≥ Connect the AC mains lead after all other connections are complete.
≥ Using an outdoor antenna (optional) (➜ page 31).
AM loop antenna
Stand the antenna up on its base.
Place the antenna where reception is best.
Keep loose antenna cable away from other wires
and cables.
AC mains lead
[Saudi[Arabia[and[Kuwait[
BE SURE TO READ THE
CAUTION FOR THE AC
MAINS LEAD ON PAGE 4
BEFORE CONNECTION.
To household mains socket
Conserving power
The main unit consumes a small amount of power, even when it is turned off (For Southeast Asia, Thailand, the Middle East, South Africa, Saudi
Arabia and Kuwait: approx. 0.65 W or for Australia and N.Z.: approx. 0.5 W). To save power when the unit is not to be used for a long time, unplug it
from the household mains socket.
You will need to reset some memory items after plugging in the main unit.
[Note]
The included AC mains lead is for use with this unit only. Do not use it with other equipment. Also, do not use cords for other equipment with this unit.
12
FM indoor antenna AC mains lead
[Southeast[Asia,[Thailand,]
[the[Middle[East,[South[Africa,[
[Saudi[Arabia[and[Kuwait[
Click!
Red
[Saudi[Arabia[and[Kuwait[
The illustration shows the model for Southeast Asia, Thailand,
the Middle East, South Africa, Saudi Arabia and Kuwait.
FM indoor antenna
Affix this end of the antenna where
reception is best.
Adhesive tape
Main unit
While pushing, insert the wire fully.
White
Loosen the terminal
screw with a Phillips-
head screwdriver.
Black
[Australia[and[N.Z.]
[Southeast[Asia,[Thailand,[the[Middle[East,[
[South[Africa,[Saudi[Arabia[and[Kuwait[
Before connecting
the AC mains lead
Set the voltage.
Change the voltage selector to the
appropriate position for the area in
which this system is used.
Re-tighten the
terminal screw.