Panasonic SC-HT892 Operating Instructions Manual page 11

Other video connections for improved picture quality
COMPONENT VIDEO OUT
Television
(not included)
≥ Using the COMPONENT VIDEO OUT terminals
The COMPONENT VIDEO OUT terminals provides a purer picture than the S-VIDEO OUT terminal. These terminals can be used for either
interlaced or progressive output. Connection using these terminals outputs the color difference signals (P
order to achieve high fidelity in reproducing colors.
≥ The description of the component video input terminals depends on the television or monitor (e.g. Y/P
Connect to terminals of the same color.
To enjoy progressive video
≥ Connect to a progressive output compatible television.
1 Set "Video Output" to "Off" (➜ page 27, "HDMI" tab).
2 Set "Video Output Mode" to "480p" or "576p", and then follow the instructions on the menu screen (➜ page 23, Picture Menu).
S-VIDEO OUT
≥Using the S-VIDEO OUT terminal
The S-VIDEO OUT terminal achieves a more vivid picture than the VIDEO OUT terminal by separating the chrominance (C) and luminance (Y)
signals. (Actual results depend on the television.)
∫ Cable TV box or video cassette recorder connection
Cable TV box or video cassette recorder (not included)
RF IN
To your
cable TV
service or
television
RF OUT
antenna
Video cables
(not included)
COMPONENT
VIDEO IN
P
B
P
R
Y
Television
(not included)
S-video cable
S-VIDEO
(not included)
IN
Television
(not included)
RF IN
AUDIO AUDIO
OUT
RF cable
L
(not included)
R
VIDEO OUT
VIDEO IN
Audio cable
IN
(not included)
Video cable
(included)
Back of the
main unit
COMPONENT VIDEO OUT
Y
P
B
P
R
VIDEO S-VIDEO
OUT OUT
/P ) and luminance signal (Y) separately in
B R
/P , Y/B-Y/R-Y, Y/C /C ).
B R B R
Back of the
main unit
COMPONENT VIDEO OUT
Y
P
B
P
R
VIDEO
S-VIDEO
OUT
OUT
Back of the main unit
COMPONENT VIDEO OUT
Y
L L
P
B
R R
TV TV
P
R
VIDEO VIDEO
S-VIDEO
AUDIO AUDIO AUX
OUT OUT
IN IN OUT
You can use the AUX terminal for the
audio input when you connect another
external device (e.g. video cassette
recorder). Select "AUX" as the input
source (SELECTOR ➜ page 14).
11