Troubleshooting Guide - Wolf CT15I Use & Care Information Manual

T R O U B L E S H O OT I N G
T R O U B L E S H O OT I N G
P R O B L E M
Cooktop does not
function at all
Heating elements do not
heat properly
Control panel blinks and
cooktop will not heat
G U I D E
G U I D E
P R O B A B L E C A U S E
Cooktop is not connected to
a proper electrical circuit.
Fuse is blown or circuit
breaker is tripped.
No electricity is being
supplied to the cooktop.
Cooktop is in Lock mode.
Cooktop is connected to a
120 V power supply.
Power supply connection
is loose.
Improper cookware is
being used.
Improper cookware is
being used.
C O R R E C T I O N
Have an electrician verify that
the proper voltage is being
applied to the cooktop.
Have an electrician replace the
fuse or reset the circuit breaker.
Have an electrician check the
house power supply.
Touch and hold the "key"
symbol for 3 seconds to unlock
the control panel.
Have an electrician connect the
cooktop to the properly rated
voltage.
Have an electrician tighten
connections at the junction box.
Select the proper cookware as
outlined in Cookware Selection
on page 11.
Select the proper cookware as
outlined in Cookware Selection
on page 11.
13