Wolf CT15I Use & Care Information Manual page 10

W O L F
C O O K TO P
To activate a heating element, touch the
OFF ON touch pad that corresponds to the
element you wish to use. The power bar
indicator graph will begin to blink and show
a half-power status.
To complete the element activation, touch one
of the following symbols or touch pads of the
element control while the bar graph is still
blinking:
Touch the "+" or "–" symbol to set power
output to 25% and complete the activation.
Touch HIGH to set the power output to full
power and complete the activation.
Touch MELT to set the power output to the
lowest power and complete the activation.
HIGH touch pad
10
I N D U C T I O N C O O K TO P
O P E R AT I O N
HIGH
touch pad
MELT touch pad
U S E & C A R E
To change the power level setting—the
element is activated and the power bar graph
remains steadily lit:
Touch "+" to increase the power level by
preset one or two bars on the power bar
graph.
Touch "–" to decrease the power level by
preset one or two bars on the power bar
graph.
Touch HIGH to increase the power level
directly to full power.
Touch MELT to decrease the power level
directly to the lowest power.
Touch OFF ON to turn the element off.
IMPORTANT NOTE: If no cookware is placed
on a heating element after activating the
element, the control will blink for 30 seconds,
then the element will automatically shut off.
IMPORTANT NOTE: To quickly deenergize
both heating elements, use the universal OFF
touch pad located in the lower area of the
control panel.
MELT
touch pad
Universal OFF touch pad
Universal OFF
touch pad