Table of Contents
Advertisement
F) BEATER BAR CLEANING
Clean beater bar after every five uses and every time the belt is replaced.
1 1
G) CLEANING EXTERIOR
Unplug mains lead from mains socket.
Clean exterior using a clean, soft cloth that has been
dipped in a solution of mild liquid detergent and water,
then wrung dry. DO NOT drip water on vacuum cleaner.
Wipe dry after cleaning.
To reduce static electricity and dust build-up, wipe outer
surface of vacuum cleaner.
Remove lower plate. Refer to BELT REPLACEMENT (page 13).
Cut off any hair, thread, string, carpet pile, and lint entangled around beater bar
with a pair of scissors.
Remove beater bar. Refer to BELT REPLACEMENT (page 13).
Remove any string or debris located on the end caps.
Reinstall beater bar and lower plate. Refer to BELT REPLACEMENT (page 13).
Electrical Shock And Personal Injury Hazard
Disconnect electrical supply before servicing or
cleaning the vacuum cleaner. Failure to do so could
result in electrical shock or personal injury from
vacuum cleaner suddenly starting.
- 15 -
WARNING
Advertisement
Table of Contents
