Printing The Pictures - Panasonic LUMIX DMC-FX50 Operating Instructions Manual

Printing the Pictures

By connecting the camera directly to a
printer supporting PictBridge via the USB
connection cable (supplied), you can select
the pictures to print and start printing on the
camera's screen.
Set print settings such as the print quality
on the printer beforehand. (Read the printer
operating instructions.)
A: USB connection cable (supplied)
B: AC adaptor (DMW-AC5; optional)
• It may take time to print some pictures.
Use a battery with sufficient battery power
(P12) or the AC adaptor (DMW-AC5;
optional) when you connect to a printer.
• Turn the camera off before inserting or
removing the cable for the AC adaptor
(DMW-AC5; optional).
1 Turn on the camera and the
printer.
2 Set the mode dial to [
3 Connect the camera to a printer
via the USB connection cable A
(supplied).
• Connect the USB connection cable with
the [
the [DIGITAL] socket.
• Hold the USB connection cable at C
and insert straight in or take straight
out.
• Do not use any other USB connection
cables except the supplied one.
• If the mode dial is not set to [
the camera is connected to the PC,
disconnect the USB connection cable, set
DIGITAL
the mode dial to [
the USB connection cable again.
AV OUT
• To print the age in [BABY1]/[BABY2]
(P55) in scene mode or the departure
DC IN
date for [TRAVEL DATE] (P56), use the
software [LUMIX Simple Viewer] in the
CD-ROM (supplied) and print from the
PC. For information about this, refer to the
separate operating instructions for PC
connection.
• To find out more about PictBridge
compliant printers, contact your local
dealer.
Connecting to other equipment
] mark facing the [2] mark on
] and then connect
].
] when
95
VQT0Y35