[Favorite]; Setting Your Favourite Pictures; Favorite Setting Your Favourite Pictures - Panasonic LUMIX DMC-FX50 Operating Instructions Manual

Menu Settings
∫ Setting the audio, duration and effect
Select [DURATION], [EFFECT] or [AUDIO]
on the screen shown in step
[DURATION] Can be set to [1SEC.],
[2SEC.], [3SEC.],
[5SEC.] or [MANUAL]
(manual playback).
[EFFECT] A slide show effect can
be selected.
[OFF]:No effect
• If you set [DURATION]
[AUDIO] If set to [ON], the audio
of the pictures with audio
is played back.
• You can only select [MANUAL] when
[ ] has been selected in step
• Move 2/1 to display the previous or
next picture when [MANUAL] is
selected.
82
VQT0Y35
2
and set.
: New pictures slide
across the screen.
: New pictures
appear from
behind the current
pictures and
replace them.
: New pictures
gradually fill the
screen from the
centre.
: An effect is
selected at
random.
to [MANUAL] the
settings in [EFFECT]
are disabled.
1
.
• If you set [AUDIO] to [ON] and then play
back a picture with audio, the next picture
will be displayed after the audio has
finished.
• You cannot play back motion pictures and
use power save in a slide show. (However,
the setting for power save mode is fixed to
[10MIN.] while pausing a slide show or
playing back a manual slide show.)

[FAVORITE]

Setting your favourite pictures

Press [ ] to display the [PLAY] mode
MENU
/SET
menu and select the item to set. (P80)
You can do the following if a mark has been
added to pictures and they have been set
as favourites.
• Delete all the pictures not set as
favourites. ([ALL DELETE EXCEPT
(P32)
• Play back the pictures set as favourites
only as a slide show. (P81)
1 Move 4 to select [ON] and then
press [MENU/SET].
PLAY
DUAL DISPLAY
SLIDE SHOW
FAVORITE
ROTATE DISP.
ROTATE
SELECT
• You cannot set pictures as favourites if
[FAVORITE] is set to [OFF]. Also the
favourites icon [
when [FAVORITE] is set to [OFF] even
if it was previously set to [ON].
• You cannot select [CANCEL] if none of
the pictures have [
/
1
3
OFF
OFF
ON
ON
CANCEL
MENU
/SET
MENU
SET
] will not appear
] displayed.
])