Using The [Play] Mode Menu; [Dual Display]; Displaying The Recorded Pictures On A Dual Display - Panasonic LUMIX DMC-FX50 Operating Instructions Manual

Menu Settings
Using the [PLAY] mode
menu
You can use various functions in playback
mode to rotate pictures, set protection for
them etc.
• Refer to P80 to 91 for each menu item.
1 Press [MENU/SET].
2 Move 3/4 to select the menu
item and then move 1.
PLAY
DUAL DISPLAY
SLIDE SHOW
FAVORITE
ROTATE DISP.
ROTATE
SELECT
PLAY
DPOF PRINT
PROTECT
AUDIO DUB.
RESIZE
TRIMMING
SELECT
• Move 4 at A to switch to the next
menu screen.
• After performing steps
the description of the menu item in the
operating instructions and then set it.
∫ About the menu screen items
• There are 3 menu screens (1/3, 2/3 and 3/3).
• You can switch menu screens from any
menu item by rotating the zoom lever.
/
1
PLAY
3
DUAL DISPLAY
PLAY
SLIDE SHOW
DPOF PRINT
OFF
FAVORITE
PROTECT
ON
ROTATE DISP.
AUDIO DUB.
ROTATE
RESIZE
SELECT EXIT
TRIMMING
SELECT
80
VQT0Y35
/
1
3
OFF
ON
MENU
EXIT
/
2
3
MENU
EXIT
1 2
and , refer to
/
2
3
3 /
PLAY
3
OFF
ASPECT CONV.
ON
FORMAT
MENU
EXIT
MENU
SELECT EXIT

[DUAL DISPLAY]

Displaying the recorded pictures
on a dual display
Press [ ] to display the [PLAY] mode
MENU
/SET
menu and select the item to set. (P80)
You can display two recorded pictures on
the screen to compare them.
Move 3/4 to switch the orange
frame between the top and the
bottom and move 2/1 to select
the picture.
2006.12.1
EXIT
T
1 The orange frame switches to the top.
(You can select the picture at the top.)
2 The orange frame switches to the
bottom. (You can select the picture at
the bottom.)
3 The previous picture is displayed.
4 The next picture is displayed.
• When you rotate the zoom lever
towards [ ] [T], the magnification
becomes higher. When you rotate the
zoom lever towards [
magnification becomes lower.
• When you change the magnification,
the zoom position indication appears for
about 1 second so that you can check
the position of the enlarged section.
1/10
1
MENU
3
2
] [W], the
4